CONTROL/MONITORING

1. CONTROL/MONITORING Understand the concept to improve parameter setting

2. Series 40 & 80 ? Logic equations • Are used to made additions to standard processing operations. • Logic equation create simple logic functions by combining data received from • protection functions • or logic inputs. • Logic equation use: • logic operators (and, or, xor, not) • and time delays • Logic equation may not be used to: • modify standard circuit breaker control, logic discrimination or recloser functions • create as complete control logic schemes as with Logipam

3. Series 80 ? Logipam • Customize SEPAM Series 80 • Based on the ladder diagram principle • For specific complex functions and automation: • specific source transfer • motor starting sequence • load shedding • management of cubicle peripheral equipment • etc ...

4. Series 80 Sepam functional blocks Protection functions Control matrix 50/51 50N/51N, etc. LEDs Logic equations Logique equation / Logipam Customization of control logic Messages Standard control logic Logic outputs CB control Recloser SSL, etc. Logic inputs Mimic diagram Single-line diagram

5. Protection functions Without standard control logic Control matrix LEDs Messages Logic outputs Logic inputs

6. Standard control logic With standard control logic Protection functions Control matrix LEDs Messages Logic outputs Logic inputs

8. Logic equations / logipam With equation editor / logipam Protection functions Control matrix LEDs Messages Logic outputs Logic inputs

9. Standard control logic With equation editor / logipam and standard control logic Protection functions Control matrix LEDs Logic equations / logipam Messages Logic outputs Logic inputs

10. Series 80 Standard control logic Mimic diagram With equation editor / logipam, standard control logic and mimic diagram editor Protection functions Control matrix LEDs Logic equations / logipam Messages Logic outputs Logic inputs