1 / 30

Sparse Matrix Methods

Sparse Matrix Methods. Day 1: Overview Day 2: Direct methods Day 3: Iterative methods The conjugate gradient algorithm Parallel conjugate gradient and graph partitioning Preconditioning methods and graph coloring Domain decomposition and multigrid Krylov subspace methods for other problems

dessa
Download Presentation

Sparse Matrix Methods

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sparse Matrix Methods • Day 1: Overview • Day 2:Direct methods • Day 3: Iterative methods • The conjugate gradient algorithm • Parallel conjugate gradient and graph partitioning • Preconditioning methods and graph coloring • Domain decomposition and multigrid • Krylov subspace methods for other problems • Complexity of iterative and direct methods

  2. SuperLU-dist: Iterative refinement to improve solution Usually 0 – 3 steps are enough • Iterate: • r = b – A*x • backerr = maxi ( ri / (|A|*|x| + |b|)i ) • if backerr < ε or backerr > lasterr/2 then stop iterating • solve L*U*dx = r • x = x + dx • lasterr = backerr • repeat

  3. (Matlab demo) • iterative refinement

  4. Convergence analysis of iterative refinement Let C = I – A(LU)-1 [ so A = (I – C)·(LU) ] x1 = (LU)-1b r1 = b – Ax1 = (I – A(LU)-1)b = Cb dx1 = (LU)-1 r1 = (LU)-1Cb x2 = x1+dx1 = (LU)-1(I + C)b r2 = b – Ax2 = (I – (I – C)·(I + C))b = C2b . . . In general, rk = b – Axk = Ckb Thus rk  0 if |largest eigenvalue of C| < 1.

  5. Direct A = LU Iterative y’ = Ay More General Non- symmetric Symmetric positive definite More Robust More Robust Less Storage The Landscape of Sparse Ax=b Solvers D

  6. Conjugate gradient iteration x0 = 0, r0 = b, p0 = r0 for k = 1, 2, 3, . . . αk = (rTk-1rk-1) / (pTk-1Apk-1) step length xk = xk-1 + αk pk-1 approx solution rk = rk-1 – αk Apk-1 residual βk = (rTk rk) / (rTk-1rk-1) improvement pk = rk + βk pk-1 search direction • One matrix-vector multiplication per iteration • Two vector dot products per iteration • Four n-vectors of working storage

  7. Conjugate gradient: Krylov subspaces • Eigenvalues: Au = λu { λ1, λ2 , . . ., λn} • Cayley-Hamilton theorem: (A – λ1I)·(A – λ2I) · · · (A – λnI) = 0 ThereforeΣ ciAi = 0 for someci so A-1 = Σ (–ci/c0)Ai–1 • Krylov subspace: Therefore if Ax = b, then x = A-1 b and x  span (b, Ab, A2b, . . ., An-1b) = Kn (A, b) 0  i  n 1  i  n

  8. Conjugate gradient: Orthogonal sequences • Krylov subspace: Ki (A, b)= span (b, Ab, A2b, . . ., Ai-1b) • Conjugate gradient algorithm:for i = 1, 2, 3, . . . find xi  Ki (A, b) such that ri= (Axi – b)  Ki (A, b) • Notice ri  Ki+1 (A, b), sorirj for all j < i • Similarly, the “directions” are A-orthogonal:(xi – xi-1 )T·A·(xj – xj-1 ) = 0 • The magic: Short recurrences. . .A is symmetric => can get next residual and direction from the previous one, without saving them all.

  9. Conjugate gradient: Convergence • In exact arithmetic, CG converges in n steps (completely unrealistic!!) • Accuracy after k steps of CG is related to: • consider polynomials of degree k that are equal to 1 at 0. • how small can such a polynomial be at all the eigenvalues of A? • Thus, eigenvalues close together are good. • Condition number:κ(A) = ||A||2 ||A-1||2 = λmax(A) / λmin(A) • Residual is reduced by a constant factor by O(κ1/2(A)) iterations of CG.

  10. (Matlab demo) • CG on grid5(15) and bcsstk08 • n steps of CG on bcsstk08

  11. P0 P1 P2 P3 x P0 P1 P2 P3 y Conjugate gradient: Parallel implementation • Lay out matrix and vectors by rows • Hard part is matrix-vector producty = A*x • Algorithm Each processor j: Broadcast x(j) Compute y(j) = A(j,:)*x • May send more of x than needed • Partition / reorder matrix to reduce communication

  12. (Matlab demo) • 2-way partition of eppstein mesh • 8-way dice of eppstein mesh

  13. Preconditioners • Suppose you had a matrix B such that: • condition number κ(B-1A) is small • By = z is easy to solve • Then you could solve (B-1A)x = B-1b instead of Ax = b • B = A is great for (1), not for (2) • B = I is great for (2), not for (1) • Domain-specific approximations sometimes work • B = diagonal of A sometimes works • Or, bring back the direct methods technology. . .

  14. (Matlab demo) • bcsstk08 with diagonal precond

  15. x A RT R Incomplete Cholesky factorization (IC, ILU) • Compute factors of A by Gaussian elimination, but ignore fill • Preconditioner B = RTR  A, not formed explicitly • Compute B-1z by triangular solves (in time nnz(A)) • Total storage is O(nnz(A)), static data structure • Either symmetric (IC) or nonsymmetric (ILU)

  16. (Matlab demo) • bcsstk08 with ic precond

  17. 1 4 1 4 3 2 3 2 Incomplete Cholesky and ILU: Variants • Allow one or more “levels of fill” • unpredictable storage requirements • Allow fill whose magnitude exceeds a “drop tolerance” • may get better approximate factors than levels of fill • unpredictable storage requirements • choice of tolerance is ad hoc • Partial pivoting (for nonsymmetric A) • “Modified ILU” (MIC): Add dropped fill to diagonal of U or R • A and RTR have same row sums • good in some PDE contexts

  18. Incomplete Cholesky and ILU: Issues • Choice of parameters • good: smooth transition from iterative to direct methods • bad: very ad hoc, problem-dependent • tradeoff: time per iteration (more fill => more time)vs # of iterations (more fill => fewer iters) • Effectiveness • condition number usually improves (only) by constant factor (except MIC for some problems from PDEs) • still, often good when tuned for a particular class of problems • Parallelism • Triangular solves are not very parallel • Reordering for parallel triangular solve by graph coloring

  19. (Matlab demo) • 2-coloring of grid5(15)

  20. A B-1 Sparse approximate inverses • Compute B-1 A explicitly • Minimize || B-1A – I ||F (in parallel, by columns) • Variants: factored form of B-1, more fill, . . • Good: very parallel • Bad: effectiveness varies widely

  21. Support graph preconditioners: example [Vaidya] • A is symmetric positive definite with negative off-diagonal nzs • B is a maximum-weight spanning tree for A (with diagonal modified to preserve row sums) • factor B in O(n) space and O(n) time • applying the preconditioner costs O(n) time per iteration G(A) G(B)

  22. Support graph preconditioners: example • support each edge of A by a path in B • dilation(A edge) = length of supporting path in B • congestion(B edge) = # of supported A edges • p = max congestion, q = max dilation • condition number κ(B-1A) bounded by p·q (at most O(n2)) G(A) G(B)

  23. Support graph preconditioners: example • can improve congestion and dilation by adding a few strategically chosen edges to B • cost of factor+solve is O(n1.75), or O(n1.2) if A is planar • in recent experiments [Chen & Toledo], often better than drop-tolerance MIC for 2D problems, but not for 3D. G(A) G(B)

  24. Domain decomposition (introduction) • Partition the problem (e.g. the mesh) into subdomains • Use solvers for the subdomains B-1 andC-1 to precondition an iterative solver on the interface • Interface system is the Schur complement: S = G – ET B-1E –FT C-1F • Parallelizes naturally by subdomains A =

  25. (Matlab demo) • grid and matrix structure for overlapping 2-way partition of eppstein

  26. Multigrid (introduction) • For a PDE on a fine mesh, precondition using a solution on a coarser mesh • Use idea recursively on hierarchy of meshes • Solves the model problem (Poisson’s eqn) in linear time! • Often useful when hierarchy of meshes can be built • Hard to parallelize coarse meshes well • This is just the intuition – lots of theory and technology

  27. Other Krylov subspace methods • Nonsymmetric linear systems: • GMRES: for i = 1, 2, 3, . . . find xi  Ki (A, b) such that ri= (Axi – b)  Ki (A, b)But, no short recurrence => save old vectors => lots more space • BiCGStab, QMR, etc.:Two spaces Ki (A, b)and Ki (AT, b)w/ mutually orthogonal basesShort recurrences => O(n) space, but less robust • Convergence and preconditioning more delicate than CG • Active area of current research • Eigenvalues: Lanczos (symmetric), Arnoldi (nonsymmetric)

  28. Direct A = LU Iterative y’ = Ay More General Non- symmetric Symmetric positive definite More Robust More Robust Less Storage The Landscape of Sparse Ax=b Solvers

  29. n1/2 n1/3 Complexity of direct methods Time and space to solve any problem on any well-shaped finite element mesh

  30. n1/2 n1/3 Complexity of linear solvers Time to solve model problem (Poisson’s equation) on regular mesh

More Related