1 / 10

Presented by: Aakash Patel Advisor: Dr. Chung –E Wang

TO ILLUSTRATE AND IMPLEMENT INITIAL RANGING & Transfer operational parameters PHASEs OF THE CABLE MODEM. Presented by: Aakash Patel Advisor: Dr. Chung –E Wang. Agenda. Abbreviations Introduction & Motivation Objective of the Project Scope of the Project Methodology References

devon
Download Presentation

Presented by: Aakash Patel Advisor: Dr. Chung –E Wang

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TO ILLUSTRATE AND IMPLEMENT INITIAL RANGING & Transfer operational parameters PHASEs OF THE CABLE MODEM Presented by: Aakash Patel Advisor: Dr. Chung –E Wang

  2. Agenda • Abbreviations • Introduction & Motivation • Objective of the Project • Scope of the Project • Methodology • References • Questions?

  3. Abbreviations • CM: Cable Modem • CMTS: Cable Modem Termination System • DOCSIS: Data Over Cable Service Interface Specification • TFTP: Trivial File Transfer Protocol • TOD: Time of Day

  4. Introduction & Motivation • Motivation and force behind the project. • This project provides an overview into the lifecycle of a cable modem. • Cable modem uses DOCSIS protocol to transmit & receive packets from CMTS. • This project discusses the methods of communication between cable modem and CMTS.

  5. Objective of the Project • In this project I will be working/developing on Initial Ranging Phase & Transfer Operational Parameters phases of the cable modem. • After successfully developing both the phases, I will be able to provide insights in both the phases and will be able to understand the role of DOCSIS v3.0 in modern CMs.

  6. Scope of the Project • Scope: • This project is limited to few important stages within the life cycle of a cable modem. • Five Stages in CM’s Initialization Sequence. • Initial Ranging Phase • IP Connectivity Phase • TOD Phase • Transfer Operational Parameters Phase • Registration Phase

  7. Architecture of Simulator System • This slide will give the overview of simulator system.

  8. Methodology & Achievements • Review the literature on DOCSIS Mulpi v3.0. • Phase 1: • Development of Initial Ranging Phase. • Outcome & Achievement: Cable modem & CMTS will be able to communication with each other. • Phase 2: • Development of the TFTP Phase. • Outcome & Achievement: Connectivity between cable modem and TFTP server. After the completion of this phase cable modem will go in ONLINE state and will be ready to transmit and receive data packets.

  9. References • Cisco Systems. DPC2203 and EPC 2203 VoIP Cable Modem Installation and Operation Guide. 2008. http://www.cisco.or.at/en/US/docs/video/at_home/Cable_Modems/2200_Series/4011044_A.pdf • Simon Amor. Introduction to network functions in C. September 2008. http://shoe.bocks.com/net/#intro • Television Laboratories, Data-Over-Cable Service Interface Specification DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification. July 2010. http://www/cablelabs.com/specifications/CM-SP-MULPIv3.0-14-101008.pdf

  10. Questions?

More Related