1 / 3

CRYOGENIC TESTING PREPARATION

CRYOGENIC TESTING PREPARATION. The racetrack coil requires a cooldown to and power testing at a temperature near 77K A 12 x 12 x 12” aluminum test module has been fabricated to qualify pedestrian insulation types for the above requirement

dooley
Download Presentation

CRYOGENIC TESTING PREPARATION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CRYOGENIC TESTING PREPARATION • The racetrack coil requires a cooldown to and power testing at a temperature near 77K • A 12 x 12 x 12” aluminum test module has been fabricated to qualify pedestrian insulation types for the above requirement • 4” of layered spun glass duct board performed adequately without dew formation difficulties • Primary lesson learned: A thin gas layer is desirable between the liquid tray and the underlying insulation • Next step: Collaborate with EE’s on power feedthroughs

  2. INSULATION TEST MODULE 2” Duct Board Sample 12” x 12” x 12” Test Module

  3. INSULATION TEST MODULE, 2” TRIAL Gaseous Vent LN2 Feed Line Dew/Frost Forming

More Related