30 likes | 167 Views
LTEC 4550.020 Network Systems Assignment 2 Mark A. Ventura. Configuring A Wireless Access Point Made Simple. Wireless Access Point Step-By-Step Procedure. The first step was figuring out which devices I wanted to use for the connections The devices I chose are: Dell Latitude 620 Laptop
E N D
LTEC 4550.020 Network SystemsAssignment 2 Mark A. Ventura Configuring A Wireless Access Point Made Simple
Wireless Access PointStep-By-Step Procedure • The first step was figuring out which devices I wanted to use for the connections • The devices I chose are: • Dell Latitude 620 Laptop • Mobile (WIFI) Hot Spot from ISP (Internet Service Provider) • USB cable (doubles as a power charger) • Ensuring the laptop and the WIFI Hot Spot were both charged, I connected both devices using the USB cable provided by the ISP • Then, following the instructions provided by the ISP for “Quick Setup” I turned on the Mobile Hot Spot allowing the device to “boot up” • The Mobile Hotspot has an automatic configuration wizard to simplify the process and it prompted me to provide a pass code • The configuration wizard then enabled the laptop to connect wirelessly • I could then disconnect the USB cable from the laptop and the Hot Spot • As long as the Mobile Hot Spot is on, the laptop automatically connects to the internet
Wireless Access Configuration Wireless WIFI Hot Spot ISP Laptop Initial Connection Made by USB