1 / 8

Engineering Applications

Engineering Applications. Introduction Spoon Catapult Launcher. Spoon Catapult Launcher. Items Needed 10 craft sticks (tongue depressors) 10 rubber bands Plastic spoon. Directions. Step 1: Take 7 of the craft sticks and tie a rubber band tightly around one end. Directions. Step 2:

elie
Download Presentation

Engineering Applications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Engineering Applications Introduction Spoon Catapult Launcher

  2. Spoon Catapult Launcher • Items Needed • 10 craft sticks (tongue depressors) • 10 rubber bands • Plastic spoon

  3. Directions • Step 1: • Take 7 of the craft sticks and tie a rubber band tightly around one end.

  4. Directions • Step 2: • Tie another rubber band tightly around the opposite end so all 7 sticks are bound together

  5. Directions • Step 3: • Take the remaining 2 sticks and tie a rubber band on one of the ends. Try to tie the band close to the edge of the sticks.

  6. Directions • Step 4: • Insert the 7 sticks banded together through the 2 stick bundle as shown in the illustration below.

  7. Directions • Step 5: • Tie a rubber band in a cross fashion joining the two pieces. The closer the 7 stick bundle gets to the edge, the more leverage the catapult will have.

  8. Directions • Step 6: • Use a few rubber bands and attach the plastic spoon on the end.

More Related