1 / 14

First results of the PAU Synthetic Aperture Radiometer

First results of the PAU Synthetic Aperture Radiometer I. Ramos-Perez, G. Forte. X. Bosch- Lluis , E. Valencia, N. Rodriguez-Alvarez, H. Park, M. Vall·llossera , and A. Camps E-mail: isaacramos@tsc.upc.edu Remote Sensing Lab Universitat Politècnica de Catalunya (UPC) – Barcelona, Spain

ena
Download Presentation

First results of the PAU Synthetic Aperture Radiometer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. First results of the PAU Synthetic Aperture Radiometer I. Ramos-Perez, G. Forte. X. Bosch-Lluis, E. Valencia, N. Rodriguez-Alvarez, H. Park, M. Vall·llossera, and A. Camps E-mail: isaacramos@tsc.upc.edu Remote Sensing Lab UniversitatPolitècnica de Catalunya (UPC) – Barcelona, Spain and IEEC-CRAE/UPC 28th of July of 2011

  2. Outline • Review of PAU-SA instrument • Potential improvements for future SMOS – like missions • Use of PRN Signals for: Calibration, FWF Determination, and receiver’s frequency response determination • Inter-calibration phase determination in post-processing and real-time systems • Some Imaging results: • Impulse response (near field) • Angular resolution (near field) • GPS satellites constellation • Conclusions

  3. PAU-RAD PAU-GNSS-R PAU-IR 1. PAU-SA Instrument 8 m PAU-SA in the robotic arm

  4. 2. Potential improvements for future SMOS’s

  5. 3.1. Use of PRN Signals for: FWF determination Centralized Calibration using: Noise Source or PRN sequences FWF(Y1Y2) SR=0.5 • Overcomes limitations of centralized noise injection • PRN with SR > 5 (flat spectrum such as Noise Source) • Estimation of FWF at =0 with 1B/2L • Amplitude error < 0.25% • Phase error < 1º SR=1 I. Ramos-Pérez et al., “Use of Pseudo-Random Noise sequences in microwave radiometer calibration”, MICRORAD 2008 I. Ramos-Pérez et al., “Calibration of Correlation Radiometers Using Pseudo-Random Noise Signals” Sensors 2009 ISSN 1424-8220 SR=5

  6. 3.2. Use of PRN Signals for: Receiver’s frequency response Using: PRN sequences Correlation of receivers’ output with local replica of PRN signal injected allows individual frequency responses to be measured (amplitude and phase) SPRN+SR1 A SPRN+SR2

  7. 4.1. Inter-calibration time in real-time systems Data: PAU-SA instrument Measurement: τ=1 s., every 2 min Off-line Processing  Decimate to simulate lack of data EKF INTERPOLATION ERROR: No aliasing • Best interpolation Methods: • Linear • Pchip • Spline • fft B ~ 1 mHz Tinter-cal max = 1 / 2·B ~ 4 min If Tinter-cal> 4 min Aliasing interpolation phase error Decimation factor 4 (8 min) Real-time Processing  Prediction, e.g. with Extended Kalman filter (EKF) Conclusion: Real-time systems require much more often calibration time to avoid estimation errors to propagate and increase rapidly

  8. 4.2. Inter-calibration time in off-line systems: SMOS Data: SMOS (L1 level)Commissioning Phase Measurement: τ=1.2 s., every 2 min Decimation Interpolation with different methods No aliasing  Optimum inter-calibration time • Best interpolation Methods: • fft • Interp (Sinc) • Spline • Max inter-calibration ~7 min • (decimation factor ~ 3.5) Optimum interpolation All visibilities (fft interpolation) B ~ 1.25 mHz Tinter-cal max = 1 / 2·B ~ 7 min If Tinter-cal> 7 min Aliasing interpolation phase error • At present: 10 min,~ 1º • But at ~7 min, < 0.3º • And << 7 min, marginal • improvement in 

  9. 5.1. Preliminary results (i): Impulse response Rectangular window for visibility samples Az +/- 10º, +/- 20º PRN Signal FFT Instrument El +/- 10º, +/- 20º Antenna 1 Pol H Az= 0º El= 0º Pol H Az= +10º El= 0º Pol H Az= +20º El= 0º PRN Source 1 Point Source : PRN signal (-70 dBm) Moving the Instrument (no temperature control) Pol V Az= 0º El= +10º Pol V Az= 0º El= +20º

  10. 5.2. Preliminary results (ii): Angular resolution 2 m 1 m 3 m 4 m Rectangular window FFT 2 PRN Signals Antennas separation at: Instrument Antenna 1 Antenna 2 PRN Source 1 PRN Source 2 Point Source: PRN signals (-70 dBm) 7 antennas per arm + rectangular window Sources – PAU-SA distance at 10 m Angular resolution (ξ,η) ~ 5.7º (Near field) No near-to-far field transformation applied

  11. 5.3. Preliminary results (iii): GPS satellites K K UTC 11:38:03 UTC 12:00:03 K K UTC 12:44:03 UTC 12:22:03 Rectangular window GPS Signal FFT GPS orbit UPC location

  12. 5.4. Preliminary results (iv): GPS satellites K

  13. 6. Summary • PAU-SA Instrument and design drivers briefly described • Successful test of use of PRN signals instead of noise for: Calibration, FWF, and receiver’s frequency response measurement • Optimum phase inter-calibration for off-line and real-time instruments. • Real-time processing (PAU-SA): due to a thermal drift, best results using: linear, pchip (piece wise cubic), spline, and fft interpolation techniques (inter-calibration time ~ 4 min) • Off-line processing (SMOS): Best results using: FFT or sincinterp, and reducing inter-calibration time ~ 7 min. • EKF to estimate phase evolution in a real-time system (PAU-SA)  larger error  more frequent calibration required (~ 1 min) • Image reconstruction using different PRN sources • Impulse response (one source in different positions of FOV) • Angular resolution(two sources with different angular separation)  ~ 0.1 • Zenith imaging of real GPS satellites:tracking GPS constellation

  14. Mr. Isaac Ramos Responsible for the design and manufacturing of the instrument Thank you!

More Related