1 / 3

Radio Frequency Test Probes

A Radio Frequency test probe is a device which allows electronic test equipment to measure radio frequency (RF) signal in an electronic circuit

equiptest
Download Presentation

Radio Frequency Test Probes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. cable harness loom or a wiring assembly, and is best described as a string of wires or cables that are capable of transmitting informational signals or operating currents. Data Patterns has built high reliability Cable Harness Test Systems for large installations. These are primarily used in launch vehicle aircraft and missile level cable harness test validation. The cable harness tester checks whether individual wires are connected to correct pins, and whether the connection is good. A base plate is provided, which is mounted a plug board for second sockets at the cable harness end. A can also be known as a cable assembly, wire harness, wiring Harness test modules provides a mechanism to perform tests mechanically, running through a series of specified tests and checking the results for a satisfactory outcome. A variety of switching harness test probes is available from equip-test for cable harness testing. The product selection covers threaded and non-threaded types with a selection of tip styles centre and travel ranges.

  2. Wherever a cable harness is being assembled it is essential that the harness or loom is tested for build and or material defects. Testing cable harness typically include: Continuity resistance, short circuit failure, high voltage insulation resistance. URL:--> www.equip-test.com Address:-> Equip–Test Kft., Vágóhíd u. 19. H-2220 Vecsés, Hungary +36-29/550-940 Fax: +36-29/356-480 THANK YOU THANK YOU

More Related