1 / 34

Modeling Data-Centric Routing in Wireless Sensor Networks

Modeling Data-Centric Routing in Wireless Sensor Networks. Bhaskar Krishnamachari, Deborah Estrin, Stephan Wicker. OUTLINE. Introduction Routing Models Data Aggregation Models Theoretical Results Experimental Results Shortcomings Related Work and Conclusions. INTRODUCTION.

erimentha-arianna
Download Presentation

Modeling Data-Centric Routing in Wireless Sensor Networks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Modeling Data-Centric Routing in Wireless Sensor Networks Bhaskar Krishnamachari, Deborah Estrin, Stephan Wicker

  2. OUTLINE • Introduction • Routing Models • Data Aggregation Models • Theoretical Results • Experimental Results • Shortcomings • Related Work and Conclusions

  3. INTRODUCTION • Sensor Nets Properties • Reverse Multicast • Data Redundancy • Sensors Not Mobile • Data Aggregation • Eliminate Redundancy • Minimize Transmissions • Save Energy

  4. Routing Models • Address Centric • Each source independently send data to sink • Data Centric • Routing nodes en-route look at data sent Source 2 Source 2 Source 1 Source 1 A B A B Sink Sink

  5. Routing Models • Senarios • All sources have different information • All sources have same data • Sources send Info with not deterministic redundancy. • 1 A.C and D.C equivalent • 2.A.C can be better • 3 D.C is better

  6. DATA AGGREGATION • Aggregation function is simple • Duplicate suppression • Max, min etc…. • Node transmits 1 packet for multiple inputs • Optimal Aggregation • Minimum Steiner tree problem (multicast tree) • Optimum no . Of transmission = no. of edges in the minimum Steiner tree. • NP Hard problem

  7. Steiner Trees *A minimum-weight tree connecting a designated set of vertices, called terminals, in a weighted graph or points in a space. The tree may include non- terminals, which are called Steiner vertices or Steiner points 5 2 2 b d g b d g 3 1 3 1 1 4 1 5 2 1 e h e h 1 2 2 1 a c f a 3 2 3 *Definition taken from the NIST site. http://www.nist.gov/dads/HTML/steinertree.html

  8. Data Aggregation • Suboptimal Aggregation • Center at Nearest Source (CNS) • Shortest Paths Tree (SPT) • Greedy Incremental tree (GIT) • Performance measures • Energy savings • Delay • Robustness

  9. Source Placement Models • Nodes distributed randomly per unit sq. • Communication radius • Event Radius Model • Single point origin of event • Data sources in Sensing Range, S • no. of data sources = π * S 2 * n • Random Sources model • K nodes randomly distributed act as sources

  10. Source Placement (Event Radius) Figure from the original paper.

  11. Source Placement (random) Figure from the original paper.

  12. Theoretical Results • Max gains sources close together, sink far • Result 1: Total no. of transmissions for A.C • NA = d1 + d2 + …… + dk = sum(di) ------ ( 1 ) • Result 2: optimal transmissions for D.C • source nodes = S1, S2, …. Sk. • diameter X >= 1 • Max of the Pair-wise shortest path between nodes • No. of Transmissions = ND • Optimal ND <= (k – 1)X + min(di) -------- ( 2 ) ND >= min(di) + (k - 1) ----------- ( 3 )

  13. Theoretical results • Proof of 2. • Data aggregation tree • K – 1 sources  source nearest sink • No. of edges <= ( k – 1 )X + min(di) • Optimum <= No of edges • Proof of 3 • Smallest possible steiner tree if X = 1

  14. Theoretical Results • Result 4: if X <= min(di) then ND < NA • Proof of 4: • ND < ( k – 1) X + min(di) < (k)min(di)  ND < sum(di) = NA --------------------- ( 4 ) • Fractional Savings FS • FS = ( NA – ND ) / ( NA ) ------------------- ( 5 ) • Range from 0 to 1

  15. Theoretical Results • Result 5: bounds for FS • FS >= 1 – ((k-1)X + min(di))/sum(di) ----- ( 6 ) • FS <= 1-(min(di) + k – 1)/sum(di) --------- ( 7 ) • Result 6: • if min(di) = max(di) = d • 1 – ((k-1)X + d)/kd <= FS <= 1-(d + k – 1)/kd ----- ( 8 ) • If X and k are constant d  ∞ • FS = 1 – 1/k -------------------------------------- ( 9 ) • If sink is far and sources close FS is k fold • 4 sources FS = 1-1/4 = 75% fewer transmissions • 10 sources = 90 %

  16. Theoretical Results • Result 7: if Sub-graph G’ = (S1 ….. Sk) is connected  data aggregation in polynomial time • Proof of 7: Start GIT ( greedy incremental tree ) • Initialized with path from sink to nearest source. • New source added in each step. Since G’ is connected • No. of edges = dmin+ k – 1 = lower bound in ( 3 ) • Result 8: in ER model when R > 2S optimal D.C runs in polynomial time • R = communication radius, S = event Radius • Proof of 8: • If R > 2S all sources are one hop of each other • GIT and CNS result in optimal tree

  17. Experimental Results • ER model • Sensing range S = 0.1 to 0.3 • Communication radius R = 0.15 to 0.45 incr 0.05 • RS model • No of sources k = 1 to 15 incr of 2 • Communication radius same as above. • N = 100 nodes randomly placed / unit area • NEXT EXPERIMENTAL RESULTS

  18. Ideal A.C for E-R model Figure from the original paper.

  19. Ideal A.C for R-S model Figure from the original paper.

  20. A.C Model • Cost highest when • More sources • Communication range low • Reasoning • More sources more transmissions • More hops between sink and sources

  21. Energy Costs E-R model Figure from the original paper.

  22. Energy Costs E-R model • GITDC coincides with optimal • Even Moderate S  connected subgraph • Result 7 holds • As R increases  CNSDC optimal • Result 8 holds

  23. Energy Costs R-S model Figure from the original paper.

  24. Energy Costs R-S model • As R increases GITDS is best • SPTDS, CNSDS and AC • CNSDC is poor • Sources are random • No point aggregating near the sink

  25. No of sources varied

  26. No of sources varied • ER model • CNSDC poor • e.g s = 0.3 nearly 1/3 of all nodes are sources • Route directly to sink is faster • R-S model • GITDC performance significantly better

  27. Delay due to D.C • With Aggregation • Delay proportional to the between sink and furthest source • Difference between these distances • Greatest distance when • Communication radius is low • No. of sources is high

  28. Communication radius varied

  29. No. of sources varied

  30. Robustness • Lower cost of adding nodes • E.g. GITDC cost is shortest path of new node from tree • A.C cost is path to sink • For given energy budget • More sources in D.C than A.C • More robustness if only fraction of sources accurate

  31. Robustness graph E-R model R-S model

  32. Shortcomings • Overly simplistic A.C vs D.C • Not considered overhead costs of routing • Routing specific • Delay considered only specific to aggregation • Processing delay, congestion • Single sink

  33. Related work • Smart dust motes • TinyOS • PicoRadio • Directed diffusion

  34. Conclusion • Gains from D.C most when sources clustered together and far from sink • Robustness increase • Latency can be no negligible

More Related