1 / 27

Wind Turbines: Challenges Associated with Corrosion Protection

Explore the challenges, methods, and industry standards for protecting wind turbines from corrosion, covering onshore and offshore markets with specific coating systems. Learn about performance and durability requirements to ensure optimal turbine functionality and longevity.

evalynf
Download Presentation

Wind Turbines: Challenges Associated with Corrosion Protection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wind Turbines: Challenges Associated with Corrosion Protection

  2. Learning Outcomes • At the conclusion of this webinar you will be able to: • Define the coating-specific sections • Define challenges associated with corrosion protection of wind turbines • Define wind turbine performance standards • Define corrosion protection methods for wind turbines • Define industry standards for corrosion protection of wind turbines • Define coating systems used to protect wind turbines

  3. Two Wind Markets – Onshore and Offshore

  4. Three Coatings Sections - Onshore Rotor Blades  Nacelle Tower 

  5. Five Coatings Sections – Offshore Rotor Blades  Nacelle  Tower Mooring  Substructure 

  6. Challenges in Corrosion Protection of a Wind Turbine Most wind farm owners/operators are looking for a 20-25 year service life on all coatings. In general, coating manufacturers and tower fabricators may be asked to provide a joint warranty for a specific time frame

  7. Challenges in Corrosion Protection of a Wind Turbine – Onshore Wind turbines are usually placed in rural, often remote areas, making future maintenance challenging and expensive Wind turbines can stretch hundreds of feet in the air, making accessibility difficult

  8. Challenges in Corrosion Protection of a Wind Turbine – Onshore • On-Shore Wind Turbines face the following challenges: • Dew/condensation with or without salinity • Exposure to UV light • Wind blown debris • Extreme temperature ranges • 130 F (54 C) to -80F (-62 C)

  9. Challenges in Corrosion Protection of a Wind Turbine – Offshore • In addition to the previous challenges, off-shore wind turbines face: • Mechanical loads • Floating Ice • Biofouling in Submerged Zones • Variation in Weather Conditions • Wind and Waves

  10. Rotor Blades Performance Standards Coated rotor blades must be free of imperfections. Each surface imperfection on a wind turbine blade results in additional drag, and thus, decreases efficiency

  11. Rotor Blades Performance Standards • Rotor blades flex when in use, therefore so must there protective coatings • Coatings must flex without fracturing • Coating must be able to retain adhesion to the base coat and substrate when rotor blades flex

  12. Rotor Blades Performance Standards Coatings applied to Rotor Blades must be abrasion resistant. With Rotor Blades up to 5 MW (mega watts) being installed, they are susceptible to wind blown debris

  13. Nacelle Performance Standards The nacelle must be protected from corrosion using a protective coating system The inside must be kept clean and dry. Climate is controlled using dehumidifiers

  14. Tower Section Standards • The tower consist of three sections: • Steel Tower which is protected with a coating • Sub-Structure of the tower if sub-merged in water is protected by cathodic protection in conjunction with a coating system. If on-shore just a coating system is necessary • Mooring is protected with a coating

  15. Tower System Requirements • ISO 12944 deals with performance requirements for protective paint systems • Defines test methods used to determine the composition of the separate components of the paint systems • Defines laboratory performance test methods for assessing the paint systems • Defines criteria for evaluating results

  16. Tower System Requirements • Typical evaluation criteria is: • Degree of blistering and cracking (ASTM D 714 or ISO 4628) • Degree of rusting (SSPC VIS 2, ASTM D 610 or ISO 4628) • Degree of chalking (ISO 4628) • Degree of flaking (ISO 4628) • Adhesion (ASTM D 4541 or ISO 4624)

  17. Tower System Requirements • Creep from scribe after 4200 hours of exposure to stresses of: • UV Light • Condensation • Salt Spray • Freezing • Immersion in Sea Water (ISO 2812) • Cathodic disbonding after 4200 hours per ISO 15711

  18. Tower System Requirements • ISO 12944 defines five corrosion categories: • C1 (not corrosive interior atmosphere) up to C5-I and C5M (Industrial and Marine) • Most wind farms are rural areas, C3 (Moderate Load) • According to Part 5, C3 categories should be coated with a multi-coat system with a DFT of 6-10 mils

  19. Tower System Requirements • ISO12944 Part 5 defines expected time of protection for various coating systems • Low Durability • (2 to 5 years) • Medium Durability • (5 to 15 years) • High Durability • (greater than 15 years)

  20. On-Shore Typical Coating Systems • Three Coating System • Epoxy Zinc-Rich Primer (2 to 4 mils) • Epoxy Intermediate Coat (4 to 6 mils) • Polyurethane Topcoat (2 to 4 mils) • High Performance Two Coat Systems • Epoxy Zinc-Rich Primer (3 to 4 mils) • Polyurethane Topcoat (4 to 5 mils)

  21. Off-Shore Corrosion Protection • Standards for off-shore wind turbine protection are: • ISO 12944 • NORSOK M 501

  22. Off-Shore Corrosion Protection ISO 12944 characterizes the conditions to which offshore wind turbines are exposed to as C5 M or IM 2 (immersion) C5 M categories are non-immersed and should be coated with a multi-coat system with DFTs in the range of 12 to 20 mils IM 2 indicates structure is immersed and should be coated with a multi-coat system with DFTs in the range of 20 to 40 mils in conjunction with cathodic protection

  23. Off-Shore Corrosion Protection NORSOK M-501 specifies similar systems Atmospheric exposure should have a minimum DFT of 13 mils Immersed exposure should have a minimum DFT of 18 mils

  24. Typical Off-Shore Above Splashzone Coating Systems • Three Coating System • Epoxy Zinc-Rich Primer (2 to 4 mils) • Epoxy Intermediate Coating (2 Coats at 4-6 mils) • Polyurethane Topcoat (2-4 mils)

  25. Typical Off-Shore Under Splashzone Coating Systems • Two Coat System • Epoxy Coating (2 coats at 8-10 mils) • NOTE- For areas under water (immersion service) NORSOK requires cathodic protection to be used in conjunction with coating system • Install impressed cathodic corrosion protection • Weld sacrificial anodes

  26. Looking Ahead • Self repairing coatings • Healing agents/inhibitors release from microcapsules when coating gets damaged

  27. Summary Coating wind turbines can be challenging due to the complicated design of the structure and environmental location. To assure corrosion protection, industry standards must be followed and qualified coatings applied.

More Related