1 / 7

Standard Grade Technological Studies

Standard Grade Technological Studies. Pneumatic Systems: Control Circuits. Automatic circuits. Speed up the production Manufactures goods to the same standard There are two types of automatic circuits - Semi Automatic and Automatic. Semi-Automatic.

evan
Download Presentation

Standard Grade Technological Studies

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Standard Grade Technological Studies Pneumatic Systems: Control Circuits

  2. Automatic circuits • Speed up the production • Manufactures goods to the same standard • There are two types of automatic circuits - Semi Automatic and Automatic

  3. Semi-Automatic • Completes the process once it has been started. • Normally started by a human operator. • Below are two semi automatic circuits.

  4. Automatic Circuit • Continues to work, performing a task over and over again. • No human operator input required. • Uses roller trip and plunger actuators • They use reciprocating motion, represented by arrows shown below

  5. Automatic Circuit cont. • Below is an automatic circuit

  6. Assignment 13 1. Build and test the circuit for the polishing machine. (a) You should have noticed the only way to stop the circuit is to turn off the main air supply. It would be much better if we could use a lever operated 3/2 valve to do this. It has been suggested that the valve be placed at either point Y or point X. Try both positions and record what happens (b) Which position do you think is better? (c ) Why must a lever operated3/2 valve be used?

  7. Assignment 13 • A small company that makes spice racks wants to automate some of its production. To begin with, a drilling operation is to be controlled by a pneumatic cylinder. An operator will start the sequence and then the drill will be lowered automatically into the wood. Once the whole has been drilled to the correct depth, the cylinder should automatically instroke ready for the process to start again.

More Related