1 / 7

Stave Core Thermo-mechanical and Electrical Performance Requirements

Stave Core Thermo-mechanical and Electrical Performance Requirements. (Tim). Why & What ?. Why? It’s a WP4 deliverable M4.1 (2013/Q3) Draft stave thermo-mechanical and electrical performance requirements documented It might be useful! What? What do we mean by ‘stave’

evonne
Download Presentation

Stave Core Thermo-mechanical and Electrical Performance Requirements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Stave Core Thermo-mechanical and Electrical Performance Requirements (Tim) Liverpool WP4 Meeting (11/7/13)

  2. Why & What ? • Why? • It’s a WP4 deliverable • M4.1 (2013/Q3) • Draft stave thermo-mechanical and electrical performance requirements documented • It might be useful! • What? • What do we mean by ‘stave’ • Stave core / Stave core + EOS / Stave core + EOS +modules ? • What do we mean by ‘performance requirements’? • Geometrical • Thermo-mechanical • Electrical • Don’t worry – It’s only a DRAFT! Liverpool WP4 Meeting (11/7/13)

  3. Format? (Stolen from Ian) • Scope • Brief description ? • Assumptions • Co-cured face sheets, titanium tube, Allcomp foam, honeycomb core, Hysol 9396 • Essential Requirements • Keeps modules cool, allows insertion and puts modules roughly in the right place and keeps them there • Capable of supplying correct voltages & signals to/from modules as viewed through EOS connector(s) • Desirable Requirements • Staves should have similar properties & performance characteristics (module noise, cooling performance, stiffness, geometry) • Stave properties should not make module mounting and insertion harder than it needs to be. • Target Parameters • Mass < g • %X0 < % • Noise < e • Cost < £ Liverpool WP4 Meeting (11/7/13)

  4. Examples …. • Mechanical • Geometric tolerances Liverpool WP4 Meeting (11/7/13)

  5. Examples #2 • Thermal Liverpool WP4 Meeting (11/7/13)

  6. Examples #3 • Electrical Liverpool WP4 Meeting (11/7/13)

  7. How do we (I?) Proceed? • Draft of a draft? • Please comment (by e-mail) and I’ll collate • Produce draft • Timescale ~ 2 weeks? • Scope as shown on page 3 • Discussion in UK first • E-mail out to Lynn, Haber et al.. • Should aim for final draft version (!) by end September 2013 Liverpool WP4 Meeting (11/7/13)

More Related