1 / 3

Exothermic welding Kit for the fusion of two or more dissimilar conductors

Exothermic welding is an advance jointing technique, that create joints with 100% contact surface. For enabling continuity in any circuit, it is necessary that connections must be proper, effective and long lasting. Exothermic welding kit consisting of graphite mould, welding powder, flint gun, mould holding clamp and cleaning brushes is what you need to create these joints.<br>

exothermicweld
Download Presentation

Exothermic welding Kit for the fusion of two or more dissimilar conductors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Exploring Perfection In Surge Protection Offering Exothermic welding Kit for the fusion of two or more dissimilar conductors Every electrical equipment connected to the conducting part of the ground is called earthing. Earthing is a mandate for every installation for prevention against any catastrophe caused by electrical faults. This connection to earth can be done using conventional techniques or advance maintenance free techniques.

  2. Exploring Perfection In Surge Protection Offering The earthing system employs a conductor dug deep inside the earth to dissipate the fault current. Every equipment or its exposed parts must be connected to this conductor. The connection making section during this installation are most ignored part. Each and every component used will have its effect on the earthing system. Conventionally the joints were made using bolting, crimping, brazing, and such sort of methods. Utilizing these methods can hamper the whole functioning of your installation. Conventional joints get loose and get damaged over time. They make highly porous joints that can get corroded on a faster rate. Joints should be strong and firm that would stay for a longer period of time as they are responsible for the continuous flow of current throughout the system. For establishing a proper earthing connection that can go a longer way, you must pick exothermic welding system.

  3. Exploring Perfection In Surge Protection Offering Exothermic welding is an advance jointing technique, that create joints with 100% contact surface. For enabling continuity in any circuit, it is necessary that connections must be proper, effective and long lasting. Exothermic welding kit consisting of graphite mould, welding powder, flint gun, mould holding clamp and cleaning brushes is what you need to create these joints. The graphite mould is a purpose made mould shaped as per the size, dimensions and type of the joint that has to be made. The welding powder is poured into the mould after aligning the conductors inside the mould. After well fixing of the conductors that are to be joint, the mould is held tightly using a mould holding clamp. Then a flint gun is utilized to ignite the weld powder which will further initiate a chemical reaction inside the mould. This method does not require any external heating provision. The reaction melts the weld powder which on cooling will produce exothermically welded connection. This is a quick and long-term fix upheld for every electrical safety works. Any sort of joint namely Tee joint, straight joint, cross joint, L joint, etc. can be effortlessly created using the exothermic welding kit.

More Related