1 / 19

Brick and Wall dimensions

October 2002, LNF. OPERA Collaboration Meeting. Brick and Wall dimensions. S.Buontempo, J.Dupraz, A.Franceschi, D.Frekers, H.Pessard, P.Mugnier, E.Vanzanella. . What do we call a “brick” ? Brick components vs Responsible Institutes Review of brick component dimensions & tolerances

fairly
Download Presentation

Brick and Wall dimensions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. October 2002, LNF OPERA Collaboration Meeting Brick and Wall dimensions S.Buontempo, J.Dupraz, A.Franceschi, D.Frekers, H.Pessard, P.Mugnier, E.Vanzanella. • What do we call a “brick” ? • Brick components vs Responsible Institutes • Review of brick component dimensions & tolerances • Main steps to make a brick, dimensions & tolerances • Final brick 3D sizes • Wall dimensions

  2. What do we call a “brick” ? On last October 1st and 2nd the present working group had a meeting at CERN. The goal was to evaluate in all details the brick components and the procedure of brick manufacturing. The result was summarized in a document circulated to the OPERA Collaboration on last October 18th. In order to fit with the present OPERA schedule we need to endorse this document in the present meeting.

  3. What do we call a “brick” ? ECC CS (one emulsion sheet covered by laminated paper) CSS Carton paper Pile (emulsion,lead,emulsion,…) Skates Skates Laminated paper (exploded view, not to scale)

  4. Brick components vs Responsible Institutes Brick component Responsible Institute Lead Muenster Emulsion Nagoya Carton paper Nagoya Carton paper glue Proposed by BAM constructor and validate by Nagoya Laminated paper Nagoya Laminated paper glue Proposed by BAM constructor and validate by Nagoya CS (in envelope) Nagoya CS support LAPP for R&D and order follow-up CS support glue Proposed by BAM constructor and validate by Nagoya and LAPP Skates LAPP for R&D and order follow-up Skate glue Proposed by BAM constructor and validate by Nagoya and LAPP Add. protec. material Proposed by BAM constructor and validate by Nagoya

  5. Review of brick component dimensions & tolerances Emulsion sheet SHAPE (imposed) HORIZONTAL VERTICAL THICKNESS 125.10 +0.40/-0.55 99.80 +0.20/-0.35 0.29 +0.01/-0.01   max : 125.50 max :100.00 max :0.30 min :124.55 min :99.45 min :0.28 SIZES

  6. Review of brick component dimensions & tolerances Lead sheet SHAPE (imposed) HORIZONTAL VERTICAL THICKNESS 125.50 +0.10/-0.00 100.00 +0.10/-0.00 1.00 +0.01/-0.01 max :125.60 max :100.10 max :1.01 min :125.50 min :100.00 min :0.99 SIZES

  7. Review of brick component dimensions & tolerances Carton paper SHAPE (not imposed) THICKNESS 0.40 +0.01/-0.01 max :0.41 min :0.39 SIZES

  8. Review of brick component dimensions & tolerances Laminated paper At present we use a roll, but it could be in precut pieces or envelopes or .. SHAPE (not imposed) THICKNESS 0.108 max :0.108 min :0.108 SIZES

  9. Thermal welding Max thickness Folded lateral parts Put inside laminated paper envelope Folded top part Emulsion sheet Review of brick component dimensions & tolerances Changeable sheet SHAPE (imposed) HORIZONTAL VERTICAL THICKNESS 126.50* 102.00 1.00 * Due to the min size of the ECC= 126.696, the CS horizontal size must be 126.50 SIZES

  10. Review of brick component dimensions & tolerances Cheangable sheet support SHAPE (imposed) HORIZONTAL VERTICAL THICKNESS 125.00 99.60 2.15** ** According to plastic moulding requests (1mm required in the minimum thickness place of CSS to guarantee rigidity). SIZES

  11. Review of brick component dimensions & tolerances SKATES SHAPE (imposed) HORIZONTAL VERTICAL THICKNESS +1.2 +0.6 CS side +0.7 CS opposite +0.0 SIZES (contribution to brick sizes)

  12. Main steps to make a brick, dimensions & tolerances Pile (57emul +56 lead) SHAPE (imposed) HORIZONTAL VERTICAL THICKNESS 125.65/125.50 100.15/100.00 73.66/71.40 SIZES (max/min)

  13. Main steps to make a brick, dimensions & tolerances ECC walls (thickness including carton+origami+gluing+folding) Carton paper SHAPE (imposed) Pile (emulsion,lead,emulsion,…) Carton paper folded and glued HORIZONTAL VERTICAL THICKNESS Bottom Top CS opposite CS side 0.618/0.598 1.028/0.988 1.384/1.344 2.056/2.016 1.546/1.526 SIZES (max/min)

  14. Main steps to make a brick, dimensions & tolerances ECC (Pile + ECC walls) SHAPE (imposed) SIZES (max/min) HORIZONTAL VERTICAL THICKNESS 126.886/126.696 102.562/102.332 77.262/74.942

  15. CS glued on CSS Folded top part Main steps to make a brick, dimensions & tolerances CS+CSS CSS SHAPE (imposed) HORIZONTAL VERTICAL THICKNESS 126.60/126.50 102.10/102.00 3.35/3.25*** *** Depending on glue thickness (0.1-0.2 mm) SIZES

  16. Main steps to make a brick, dimensions & tolerances Not protected BRICK ECC+[CS+CSS]+Skate(1) + Glue(0.1) SHAPE (imposed) HORIZONTAL VERTICAL THICKNESS 128.4/128.2 103.51/103.28 80.384/77.964 SIZES

  17. Final brick 3D size Protected BRICK ECC+[CS+CSS]+ add. protection material +larger skate(1.5) + Glue(0.1) SHAPE (imposed) HORIZONTAL VERTICAL THICKNESS 128.4/128.2 103.51/103.28 81.284/78.864 (128.4/128.2) (103.51/103.28) (80.384/77.964) Not Protected SIZES

  18. Wall dimensions “Inside tray” space HORIZONTAL VERTICAL THICKNESS 3335.80 +2.60/-2.60 104.50 +0.00/-0.10 81.8 +0.20/-0.00 Average brick 128.3 x 26 max brick + 1mm clearance max brick + 0.5 clearance including tolerance on + 0.2 tray tolerance tray welding SIZES

  19. Wall dimensions WALL front view sizes (in case of tray thickness =0.8) HORIZONTAL VERTICAL   6675.20 6739.20 3335.8 x 2 + 3.6 105.3 x 64 (3.6= 2x0.8 tray +2 semi-wall gap) SIZES

More Related