1 / 16

Wiener Filtering & Basis Functions

T-61.181 Biomedical Signal Processing Sections 4.4 - 4.5.2. Wiener Filtering & Basis Functions. Nov 4th 2004 Jukka Parviainen parvi@hut.fi. Outline. a posteriori Wiener filter (Sec 4.4) removing noise by linear filtering in optimal (mean-square error) way improving ensemble averaging

fairly
Download Presentation

Wiener Filtering & Basis Functions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. T-61.181 Biomedical Signal Processing Sections 4.4 - 4.5.2 Wiener Filtering & Basis Functions Nov 4th 2004 Jukka Parviainen parvi@hut.fi

  2. Outline • a posteriori Wiener filter (Sec 4.4) • removing noise by linear filtering in optimal (mean-square error) way • improving ensemble averaging • single-trial analysis using basis functions (Sec 4.5) • only one or few evoked potentials • e.g. Fourier analysis T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  3. Wiener - example in 2D • model x = f(s)+v, where f(.) is a linear blurring effect (in the example) • target: find an estimate s’ = g(x) • an inverse filter to blurring • value of SNR can be controlled • Matlab example: ipexdeconvwnr T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  4. Part I - Wiener in EEG • improving ensemble averages by incorporating correlation information, similar to weights earlier in Sec. 4.3 • model: x_i(n) = s(n) + v_i(n) • ensemble average of M records • target: good s’(n) from x_i(n) T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  5. Wiener filter in EEG • a priori Wiener filter: • power spectra of signal (s) and noise (v) are F-transforms of correlation functions r(k) T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  6. Interpretation of Wiener • if ”no noise”, then H=1 • if ”no signal”, then H=0 • for stationary processes always 0 < H < 1 • see Fig 4.22 T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  7. Wiener in theory • design H(z), so that mean-square error E[(s(n)-s’(n))^2] minimized • Wiener-Hopf equations of noncausal IIR filter lead to H(ej ) • filter gain 0 < H < 1 implies underestimation (bias) • bias/variance dilemma T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  8. A posteriori Wiener filters • time-invariant a posteriori filtering • estimates for signal and noise spectra from data afterwards • two estimates in the book: • improvements: clipping & spectral smoothing, see Fig 4.23 T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  9. Limitations of APWFs • contradictionary results due to modalities: BAEP+VEP ok, SEP not • bad results with low SNRs, see Fig 4.24 • APWF supposes stationary signals • if/when not, time-varying Wiener filters developed T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  10. APWF - What was learnt? • authors: ”serious limitations”, ”important to be aware of possible pitfalls”, especially when ”the assumpition of stationarity is incorporated into a signal model” T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  11. Part II - Basis functions • often no repititions of EPs available or possible • therefore no averaging etc. • prior information incorporated in the model • mutually orthonormal basis func.: T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  12. Orthonormal basis func. • data is modelled using a set of weight vectors and orthonormal basic functions • example: Fourier-series/transform T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  13. Lowpass modelling • basis functions divided to two sets, ”truncating” the model • sare to be saved, size N x K • vare to be ignored (regarded as high-freq. noise), size N x (N-K) T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  14. Demo: Fourier-series http://www.jhu.edu/~signals/ • rapid changes - high frequency • value K? • transients cannot be modelled nicely using cosines/sines T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  15. Summary I: Wiener • originally by Wiener in 40’s • with evoked potentials in 60’s and 70’s by Walker and Doyle • lots of research in 70’s and 80’s (time-varying filtering by de Weerd) • probably a baseline technique? T-61.181 - Biomedical Signal Processing - Jukka Parviainen

  16. Summary II: Basis f. • signal can be modelled using as a sum of products of weight vectors and basis functions • high-frequency components considered as noise • to be continued in the following presentation T-61.181 - Biomedical Signal Processing - Jukka Parviainen

More Related