1 / 13

Vasilis Zois CS @ USC

Profit – Optimal & Stability Aware Load Curtailment in Smart Grids. Vasilis Zois CS @ USC. Introduction. Dynamic and s ophisticated demand control Direct control over household appliances Curtailment Reasons Reactive Curtailment Loss of power generation

fell
Download Presentation

Vasilis Zois CS @ USC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Profit – Optimal & Stability Aware Load Curtailment in Smart Grids VasilisZois CS @ USC

  2. Introduction • Dynamic and sophisticated demand control • Direct control over household appliances • Curtailment Reasons • Reactive Curtailment • Loss of power generation • Renewable sources don’t work at full capacity • Proactive • Maximize profits • Reduced power consumption overweigh customer compensation • Customer Satisfaction • Discounted plan  Valuation Function • Plan connected to customer load elasticity

  3. Previous Work • Dynamic pricing • Direct control achieved by monetary incentives • Cost & valuation functions • Convex cost functions • Concave valuation functions • Optimal Curtailment • Component failure as subject of attack • Quantify severity by the amount of the curtailed power • Frequency stability • Locally measured frequency • Centralized approach • Physical constraints • Low computational cost

  4. Model Analysis • Physical power systems model • Graph G= (V,E) • Vertices  Buses that generate or consume power • Edges  Transmission line i with capacity ci • Power flow model • Voltage at each bus is fixed • Cost model of power supply • with marginal cost • As power production increases cost increases rapidly • Valuation model of provided power • with marginal cost • Single valuation function for aggregated customer in bus i • Law of diminishing marginal returns

  5. Optimization Framework • =0 • Optimization problem hardness • Power grid normal operation • Phase difference • and • Theorem 1: If the supply cost functions are convex and the valuation functions are concave, then both reactive and proactive load curtailment problems are convex after linearization.

  6. Curtailment problems • Reactive curtailment • Fixed amount of supply reduction • Match the supply loss while minimizing compensation • Proactive curtailment • Supply reduction • Savings outweigh curtailment costs

  7. Experiments Overview • Curtailment Period • Fixed (e.g 15 minutes) • Optimization at the beginning • Cost savings and profits for one period • Comparison of valuation functions • Linear vs concave • Effect of line capacity in optimization

  8. Reactive curtailment experiments • Concave function • Line capacities limit load shedding on specific busses • Linear function • Same curtailment for different capacities • Comparison • Better distribution of curtailment with concave function

  9. Proactive curtailment experiments • Setup • Cost functions • Variable α and β • Load Shedding • Supply reduction on each bus changes • Total supply reduction decreases

  10. Proactive curtailment experiments (2) • Capacity effect • Profits always increase in contrast to power supply • Comparison • Higher profit than in reactive curtailment by optimizing supply reduction

  11. Curtailment limits • Additional constraints • Limit curtailed load on each bus • Preserved convexity of optimization problem • Effect of limits • Reduced profits • Limited power reduction • Limit is not reached

  12. Computational Cost • Fast response • Critical in reactive curtailment • Primary control within 5- 30s • Experiments • 14,57 or 118 bus systems • Average time from 100 iterations

  13. Thank you! Questions? https://publish.illinois.edu/incentive-pricing/publications/

More Related