1 / 13

6D Cooling with a Rectilinear FOFO Channel

6D Cooling with a Rectilinear FOFO Channel. Diktys Stratakis Brookhaven National Laboratory. AAC Group Meeting July 18, 2013. Outline & History. At the MAP meeting it was decided to abandon the Guggenheim helical channel It was recommended to focus on the Rectilinear_FOFO or snake channel

Download Presentation

6D Cooling with a Rectilinear FOFO Channel

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 6D Cooling with a Rectilinear FOFO Channel Diktys Stratakis Brookhaven National Laboratory AAC Group Meeting July 18, 2013

  2. Outline & History • At the MAP meeting it was decided to abandon the Guggenheim helical channel • It was recommended to focus on the Rectilinear_FOFO or snake channel • It was suggested to use the new 325 MHz/ 650 MHz/ 975 MHz sequence • Deliver a front-to-end simulation by beginning of FY2014 • Today, I will present preliminary results on 6D cooling with a Rectilinear_FOFO scheme 2

  3. 6D cooling baseline for a MC This Study • I start at the post-merger: • I like to see if the R_FOFO scheme works • Test the behavior of 325 MHz/ 650 MHz/ 975 MHz • Define parameters needed 3

  4. Lattice Visualization TOP VIEW • A rectilinear channel with tilted alternating solenoids and wedge absorbers SIDE VIEW SIDE VIEW 4

  5. Simulation Details • Lattice simulated with ICOOL • 16 stages with progressive decrease of beta function • Early: β=40 cm, Late: β=4.0 cm • Coils tilted by 1.1 to 1.3 deg. to generate dispersion • Liquid Hydrogen wedge for cooling. Absorber and rf windows included. • Two frequencies: 325 MHz & 650 MHz • Start with 100,000 particles • All stages are in a single deck that can be easily adjusted if the input distribution changes SIDE VIEW 5

  6. Lattice Visualization (Last Stage) • Last 7 stages have the same configuration • Coils are tilted by 1.1 deg. (not shown) 6

  7. Lattice Details

  8. Particle Tracking • Comparable (but not so good) as a Guggenheim 1.6 0.32 8

  9. Quality Factor Qmax=9.5 (R_FOFO) Qmax=11.0 (Guggen)

  10. B-Field Requirement • The maximum peak B-field is 14.5 T with 196 A/mm2 • Nb3Sn seems a good candidate. 94.69.83.62

  11. Work Plan • Diktys, almost finished the post-merge • Diktys, will work on the pre-merge • Bob, will work on the bunch merger • Charge separator? Bob and Diktys?

  12. Pre-Merge (Preliminary) • Beam distribution after the phase-rotator of the 325 MHz front-end:

  13. Lattice Performance

More Related