1 / 10

RAD 354 Chap. 13 Radiographic Technique

RAD 354 Chap. 13 Radiographic Technique. Four PRIMARY exposure factors: kVp mA Time distance. In the next 5 minutes. Write down “bullets” about what happens when on RAISES kVp. Memory “jerk” for grids. Write the following: 5 2 8 4 12 5 16 6. Now What???. 5:1 = 2X mAs

Download Presentation

RAD 354 Chap. 13 Radiographic Technique

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RAD 354 Chap. 13 Radiographic Technique • Four PRIMARY exposure factors: • kVp • mA • Time • distance

  2. In the next 5 minutes • Write down “bullets” about what happens when on RAISES kVp

  3. Memory “jerk” for grids • Write the following: • 5 2 • 8 4 • 12 5 • 16 6

  4. Now What??? • 5:1 = 2X mAs • 8:1 = 4 X mAs • 12:1 = 5 X mAs • 16:1 = 6 X mAs

  5. kVp • Beam Qualtiy • Primarily responsible for quality, BUT INCREASES in kVp also make x-ray production SLIGHT more productive • Penatration • Beam intensity • HVL • Biggest exposure factor affecting CONTRAST

  6. mA • DIRECTLY responsible for AMOUNT of radiation produced (Quantity). As mAs is doubled, so is the number of photons produced and so is PATIENT DOSE • mA stations are responsible for focal spot size selection

  7. Time • Exposure times should be practical and short enough to stop patient motion, but the shortest times also result in the most radiation output per unit of time – thus MORE wear and tear on the x-ray tube • mAs = time X mA • mAs is only measured by tube current • Responsible for Optical Density (OD)

  8. Distance (SID) • The most “forgotten” exposure factor, but perhaps the most important • Inverse Square Law • Primarily effects Optical Density (OD) • NO effect on quality • Other distance related terms: • FFD, FOD, OFD, FRD, ORD, SSD • Other geometric factors (F.S. size, pt. size, part orientation to CR and receptor

  9. FiltrationkVp driven • Inherent (.5 mm al equiv) • Added (2.0 which may also include some filtration from localizer light apparatus, etc.) in a 70-80 kVp unit • Total filtration : inherent + added (2.5 mm al equivalent)

  10. Generators • Half wave (120 cycles/sec = 60 impulses per second) – 100% ripple • “self rectified” is also half wave where the X-RAY TUBE is the DIODE • Full wave rectification (120 cycles per second = 120 impulses per second) – 1--% ripple • 3 phase, 6 pulse = 14% ripple (33% more radiation per exposure over full wave) • 3phase, 12 pulse = 4% ripple (40% more per exposure over full wave • Hi frequency = <1% ripple

More Related