200 likes | 316 Views
HES-HKS & KaoS meeting. 19/June/2012 Toshi Gogami. Contents. ENGE+SPL TOSCA New map debut !. SPL + ENGE ( TOSCA calculation ). Process. Ever ENGE+SPL 3D-CAD SAT file Create combined model directly New strategy ENGE + SPL 3D-CAD SAT file SPL SPL + tilt ….(1) ENGE
E N D
HES-HKS & KaoS meeting 19/June/2012 Toshi Gogami
Contents • ENGE+SPL TOSCA • New map debut !
Process • Ever • ENGE+SPL 3D-CAD SAT file • Create combined model directly • New strategy • ENGE + SPL 3D-CAD SAT file • SPL • SPL + tilt ….(1) • ENGE • ENGE + tilt …..(2) • Combine (1) and (2) Errors….
The way to SPL+ENGE mag. Field map • SPL • Fill holes in CAD to avert volume mesh errors. • Bvs. current density scan instead of B-I curve. Set the current density which can reproduce the measurements of magnetic flux density. • SPL + tilt ….(1) • Read precise positions and angles in global coordinates from 3D-CAD file. • Input • With no symmetry • ENGE • Fill holes in CAD to avert volume mesh errors. • B vs. current density scan instead of B-I curve. Set the current density which can reproduce the measurements of magnetic flux density. • ENGE + tilt …..(2) • Read precise positions and angles in global coordinates from 3D-CAD file. • Input • With no symmetry • Combine (1) and (2) • Set coordinates system to the same as GEANT4 code • Solve Map
SPL SPL holes • Chose 1050.0 [ A/cm2] • ( ~1.7 T )
ENGE (current density scan) ( -50.0 , -75.0 , 0.0 ) • Chose 155.0 [A/cm2] • ( ~1.56 T )
Backgrounds One box background Could not meshed well anyhow…. Two boxes background
Same coordinate system as GEANT4 code Rotated to set them same as GEANT4 code
Incidence of an electron Track Particle = electron p = 300 MeV φ= 1.67 rad θ = 87.2 mrad Okayasu Dr thesis
The effects from the other magnet • The effect on magnetic field from the other side of magnet. • 4 Points • P1 = (40 , 15 , 100) • P2 = (20 , 10 , 80 ) • P3 = (10 , 5 , 70 ) • P4 = ( 5 , 3 , 60 ) • 5 sets • SPL + ENGE model • SPL (ON) + ENGE (ON) .... Set1 • SPL (OFF) + ENGE (ON) ....Set2 • SPL (ON) + ENGE(OFF) ....Set3 • ENGE model ....Set4 • SPL model ....Set5 Want to see Set1 vs. Set2+Set3 and Set1 vs. Set4+Set5 Comparison 1 Comparison 2
考察 The effects on the calculation of mag. field • Depend on the shape and the configuration of magnets • Less than a few % effects for each component • Optical nature is intricately changed according to these plots which shows the effects for all components are different. To obtain magnetic fields which have practical nature of optics • When one calculate a magnet, put another magnet on the setup. (relatively finer mesh) • Add up those magnetic field together later. (to see this is ok or not, need do check Set1 vs. Set4+Set5) • Calculate magnetic field for those magnets at once. (relatively rough mesh)
Summary and To do • Summary • ENGE+SPL TOSCA calculation • New map is now available(combined version) • To obtain magnetic fields which have practical nature of optics • When one calculate a magnet, put another magnet on the setup. (relatively finer mesh) • Calculate magnetic field for those magnets at once. (relatively rough mesh) • To do • Output and implement new maps (E01-011) • ENGE ONLY • SPL ONLY • ENGE + SPL • Matrix tuning • mtune • Cross sections of Λ,Σ0 and 12ΛB g.s. • Efficiencies (Trigger, Tracking, DAQ, K+ selection, Burned effects, absorption, decay….)