1 / 7

MODELING MECHANICAL PROPERTIES OF ENDOVASCULAR STENTS IN THEIR EXPANDED STATE

MODELING MECHANICAL PROPERTIES OF ENDOVASCULAR STENTS IN THEIR EXPANDED STATE. determine radial force that a stent can sustain depending on the mechanical and geometrical stent parameters: Youngs modulus and shear modulus of strut material

freja
Download Presentation

MODELING MECHANICAL PROPERTIES OF ENDOVASCULAR STENTS IN THEIR EXPANDED STATE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MODELING MECHANICAL PROPERTIES OF ENDOVASCULAR STENTS IN THEIR EXPANDED STATE • determine radial force that a stent can sustain depending on the • mechanical and geometrical stent parameters: • Youngs modulus and shear modulus of strut material • Number of stent struts in the circumferential and axial direction • Reference radius and length of stent in expanded state • Width and thickness of stent struts • determine pressure-displacement relationship (radial and axial) for • a stent with given mechanical and geometrical characteristics • stents of arbitrary geometry, for example:

  2. METHODS • MATHEMATICAL THEORY OF SLENDER • CURVED RODS TO APPROXIMATE STENT STRUTS • DEVELOPMENT OF IN-HOUSE CUSTOM MADE • FINITE ELEMENT METHOD-BASED SOFTWARE • (1000 times faster than commercial software using 3D approx) • EXPERIMENTAL VALIDATION

  3. RESULTS • NON-UNIFORM GEOMETRY INFLUENCES STENTS’ • MECHANICAL RESPONSE: SMALLER DIAMONDS • IMPLY HIGHER STIFFNESS pressure=0.5 atm pressure=0.5 atm pressure=5 atm

  4. MAXIMALLY EXPANDED STENTS ARE STIFFER Colored by radial displacement Colored by longitudinal displacement R = 1cm Deformation (15 %) R = 0.8cm Larger deformation (23.5 %)

  5. STENTS PLACED IN A SMOOTH, UNIFORM LUMEN CAN SUPPORT LARGER UNIFORM PRESSURE • if radial force is not uniformly applied to a stent due to, • for example, non-axially symmetric lumen cross-section, • or a plaque deposit that has not been uniformly pushed • against the wall during balloon angioplasty, a stent is • less stiff than when it is applied to a “uniform” lumen • surface.

  6. A STUDY OF CORONARY STENT RESPONSE TO COMPRESSION AND TO BENDING FORCES STENTS CONSIDERED: • Express-like stent • (Express stent by Boston Scientific) • Cypher-like stent • (Cypher stent by Cordis) • Xience-like stent • (Xience stent by Abbott) COMPRESSION (MOVIES) BENDING (MOVIES)

  7. CONCLUSIONS • open-cell design provides more flexibility to bending • Express-like stent has high flexibility (bending) while keeping • high radial strength (radial displacement: 0.24%) • Xience-like stent is very flexible but it is also soft to • radial force (compression) (radial displacement: 2%) • Xience-like stent has the smallest longitudinal extension • under cyclic loading (struts “in phase”) • New design: more flexibility than Express with higher • radial strength…..Cypher-like stent with open-cell design

More Related