1 / 7

Principle of the process Structure Process modeling Defects Design For Manufacturing (DFM)

Principle of the process Structure Process modeling Defects Design For Manufacturing (DFM) Process variation. < 0. 5 mm. 0.5 – 12.5 mm. Production of Sheet and Film. Chill-roll extrusion. Production of Sheet and Film. Rapid solidification. Isotropic strength property.

gloria
Download Presentation

Principle of the process Structure Process modeling Defects Design For Manufacturing (DFM)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Principle of the process Structure Process modeling Defects Design For Manufacturing (DFM) Process variation Module 4a

  2. < 0. 5 mm 0.5 – 12.5 mm Production of Sheet and Film Handouts 4c

  3. Chill-roll extrusion Production of Sheet and Film Rapid solidification Handouts 4c

  4. Isotropic strength property Production of Sheet and Film Blown-film Extrusion Process Handouts 4c

  5. Production of Sheet and Film Calendering Handouts 4c

  6. Production of Sheet and Film Handouts 4c

  7. Production of Sheet and Film Coating process Handouts 4c

More Related