1 / 22

Wireless telephone history

GSM Security Overview (Part 1) By Team Leader: Sayed Shoaib Anwar Team Member 1: Vishwambar Sarsar Team Member 2: Dr. Vivek Kude. Wireless telephone history. It all started like this. First telephone (photophone) – Alexander Bell, 1880 The first car mounted radio telephone – 1921.

gribble
Download Presentation

Wireless telephone history

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. GSM Security Overview (Part 1)ByTeam Leader: Sayed Shoaib AnwarTeam Member 1: VishwambarSarsarTeam Member 2: Dr. VivekKude Wireless telephone history

  2. It all started like this • First telephone (photophone) – Alexander Bell, 1880 • The first car mounted radio telephone – 1921 RC1192_008 FDP201x_OER

  3. Going further • 1946 – First commercial mobile radio-telephone service by Bell and AT&T in Saint Louis, USA. Half duplex(PTT) • 1973 – First handheld cellular phone – Motorola. • First cellular net Bahrein 1978 RC1192_008 FDP201x_OER

  4. But what’s cellular? MSC BS PSTN HLR, VLR, AC, EIR RC1192_008 FDP201x_OER

  5. Cellular principles • Frequency reuse – same frequency in many cell sites • Cellular expansion – easy to add new cells • Handover – moving between cells • Roaming between networks RC1192_008 FDP201x_OER

  6. Generation Gap • Generation #1 – Analog [routines for sending voice] • All systems are incompatible • No international roaming • Little capacity – cannot accommodate masses of subscribers RC1192_008 FDP201x_OER

  7. Generation Gap(2) • Generation #2 – digital [voice encoding] • Increased capacity • More security • Compatibility • Can use TDMA or CDMAfor increasing capacity RC1192_008 FDP201x_OER

  8. TDMA • Time Division Multiple Access • Each channel is divided into timeslots, each conversation uses one timeslot. • Many conversations are multiplexed into a single channel. • Used in GSM RC1192_008 FDP201x_OER

  9. CDMA • Code Division Multiple Access • All users share the same frequency all the time! • To pick out the signal of specific user, this signal is modulated with a unique code sequence. RC1192_008 FDP201x_OER

  10. Back to Generations • Generation #2.5 – packet-switching • Connection to the internet is paid by packets and not by connection time. • Connection to internet is cheaper and faster [up to 56KBps] • The service name is GPRS – General Packet Radio Services RC1192_008 FDP201x_OER

  11. The future is now • Generation #3 • Permanent web connection at 2Mbps • Internet, phone and media: 3 in 1 • The standard based on GSM is called UMTS. Not yet implemented. • The EDGE standard is the development of GSM towards 3G. RC1192_008 FDP201x_OER

  12. GSM • More than 800 million end users in 190 countries and representing over 70% of today's digital wireless market. • source: GSM Association • Israel • Orange uses GSM • Pelephone and Cellcom are about to use GSM RC1192_008 FDP201x_OER

  13. GSM Overview RC1192_008 FDP201x_OER

  14. Into the architecture • Mobile phone is identified by SIM card. • Key feature of the GSM • Has the “secret” for authentication RC1192_008 FDP201x_OER

  15. Into the architecture(2) • BTS – houses the radiotransceivers of the cell and handles the radio-link protocols with the mobile • BSC – manages radio resources (channel setup, handover) for one or more BTSs RC1192_008 FDP201x_OER

  16. Into the architecture(3) • MSC – Mobile Switching Center • The central component of the network • Like a telephony switch plus everything for a mobile subscriber: registration, authentication, handovers, call routing, connection to fixed networks. • Each switch handles dozens of cells RC1192_008 FDP201x_OER

  17. Into the architecture(4) • HLR – database of all users + current location. One per network • VLR – database of users + roamers in some geographic area. Caches the HLR • EIR – database of valid equipment • AuC – Database of users’ secret keys RC1192_008 FDP201x_OER

  18. More GSM • GSM comes in three flavors(frequency bands): 900, 1800, 1900 MHz. 900 is the Orange flavour in Israel. • Voice is digitized using Full-Rate coding. • 20 ms sample => 260 bits . 13 Kbps bitrate RC1192_008 FDP201x_OER

  19. Sharing • GSM uses TDMA and FDMA to let everybody talk. • FDMA: 25MHz freq. is divided into 124 carrier frequencies. Each base station gets few of those. • TDMA: Each carrier frequency is divided into bursts [0.577 ms]. 8 bursts are a frame. RC1192_008 FDP201x_OER

  20. Channels • The physical channel in GSM is the timeslot. • The logical channel is the information which goes through the physical ch. • Both user data and signaling are logical channels. RC1192_008 FDP201x_OER

  21. Channels(2) • User data is carried on the traffic channel (TCH) , which is defined as 26 TDMA frames. • There are lots of control channels for signaling, base station to mobile, mobile to base station (“aloha” to request network access) RC1192_008 FDP201x_OER

  22. SS7 • Signaling protocol for networks • Packet – switching [like IP] • GSM uses SS7 for communication between HLR and VLR (allowing roaming) and other advanced capabilities. • GSM’s protocol which sits on top of SS7 is MAP – mobile application part RC1192_008 FDP201x_OER

More Related