1 / 16

PMT Calibration

PMT Calibration. R.Sawada 7/Jan/2007. Time calibration. Method was talked at the previous meeting. The problems which was shown before were because I used PMTs in shadow from LED. Time [nsec]. Time [nsec]. Distance [cm]. Distance [cm]. Time [nsec]. Time [nsec]. Distance [cm].

haru
Download Presentation

PMT Calibration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PMT Calibration • R.Sawada • 7/Jan/2007

  2. Time calibration Method was talked at the previous meeting. The problems which was shown before were because I used PMTs in shadow from LED.

  3. Time [nsec] Time [nsec] Distance [cm] Distance [cm] Time [nsec] Time [nsec] Distance [cm] Distance [cm]

  4. Time offset and DRS channel According to Matthis, there is similar dependence in DC data. Chip:0 Chip:1

  5. Time offset and DRS board Crate:4 Crate:5 Slot:2 There is small correlation. This was not expected because time difference due to electronics is corrected by using clock analysis. This can be variation of cable length in liquid xenon. (due to temperature co-efficient)

  6. Time distribution before calibration Crate:5,Chip1 Time [nsec] Crate:4,Chip1 Crate:5,Chip0 Crate:4,Chip0 Crate:5,Slot12 Distance [cm]

  7. Time distribution before calibration Time [nsec] Distance [cm]

  8. Result One entry is one PMT Time offset [nsec] Time offset uncertainty [nsec] This result is available in analysis and simulation. This number is uncertainty of measurement of one LED. Average is 1/sqrt(2)-1/sqrt(4) better.

  9. Q.E. Analyzed by using a task developed by Pisa group, with my small modification.

  10. PMT Nphe fit (Same as LP) Gaussian when mean of nphe > 20 Poisson x Gaussian when mean of nphe < 20 Sigma of Gaussian is obtained from pedestal events

  11. gas alpha Qsum2 > 2500 Noise Outer wall alpha Wire alpha + Top/Bottom wall alpha

  12. liquid alpha

  13. Data:MC One graph is one PMT. One point is one alpha. Gas data (1/10 statistics, full statistics analysis is still running)

  14. Data:MC One graph is one PMT. One point is one alpha. Liquid data (full statistics)

  15. Result Q.E. liquid Q.E. in liquid Q.E. in LP or Pisa Full statistics of gas is running.

  16. Summary • Time calibration was done in 200-500 psec uncertainty. Result is available • Speed of light observed on Inner/Outer and lateral is slightly different. • Q.E. estimation using liquid data was done. Gas will be finished soon. • Result will be available in 1-2 days. • Uncertainty is currently fitting error of “data v.s. MC.” It looks rather small. I will check the code again. • I used MC result produced by Pisa group. I will check it with my MC. (It must be same, because we are using the same MC software.) • PMT calibration was almost finished. I will proceed to absorption length estimation, Q.E. estimation dependence on geometry (check of MC), reconstruction and detector calibration. ÷ 1/sqrt(2) ~ 1/sqrt(4)

More Related