1 / 6

IEEE 802.21 MEDIA INDEPENDENT HANDOVER DCN : 21-12-0109-00-0000

IEEE 802.21 MEDIA INDEPENDENT HANDOVER DCN : 21-12-0109-00-0000 Title: 8/29/2012 802.21c interim document discussion, IE requirements Date Submitted: Aug. 29, 2012 Authors or Source(s ): Charlie Perkins Abstract:

hashim
Download Presentation

IEEE 802.21 MEDIA INDEPENDENT HANDOVER DCN : 21-12-0109-00-0000

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IEEE 802.21 MEDIA INDEPENDENT HANDOVER DCN: 21-12-0109-00-0000 Title: 8/29/2012 802.21c interim document discussion, IE requirements Date Submitted: Aug. 29, 2012 Authors or Source(s): Charlie Perkins Abstract: This document proposes new IEs to support SPoS key distribution for optimized handovers, and raises some issues for discussion during the Aug. 29, 2012 802.21(c) teleconference.

  2. Issues • Naming: Should “PoS” replace “MGW”? • Conformance to key hierarchy in 802.21a • New IE needed for key distribution formula • IE needed for MN to inform SPoS about desired RAT • Discussion around Figure N.6.1 and descriptions of steps 21-12-0109-00-0000

  3. Should “PoS” replace “MGW”? • Name “MGW” was originally chosen to indicate that the SRHO document was relevant to a particular class of PoS • But this is obvious and implicit within the 802.21c document, and would likely remain obvious even if 802.21c is folded into the main document • The change would have to be propagated into the figures also, making for a bit more time-consuming editing. • Even though a nontrivial change, I think it is worthwhile to avoid creating additional terminology. Too much terminology is already an impediment to clarity of the documents, and leads to inconsistencies. 21-12-0109-00-0000

  4. Conform to key 802.21a hierarchy Need to make sure that key derivation in section 11.6.1 conforms to this key hierarchy 21-12-0109-00-0000

  5. New IE needed for MIRK, etc • Here, define “MNID” to mean MNnetworkaccessid, and “TPoS_ID” to mean TPoS_Identifier. MIRK is Ktmgw • SPoS payload to TPoS must contain: • MNID, Nonce, [Ktmgw ⊕ PNGstmgw (MNID, Nonce)] • SPoS payload to MN must contain: • TPoS_ID, Nonce, [Ktmgw ⊕ PNGsmgw (TPoS_ID, Nonce)] • New IE needed to provide [Ktmgw ⊕ PNG (ID, Nonce)] • Also, MN needs IE to enable SPoS to identify the proper TPoS • Preferred RAT • SSID • BSID • … 21-12-0109-00-0000

  6. Figure N.6.1 discussion 21-12-0109-00-0000

More Related