400 likes | 772 Views
Scaffolding Safety for Metal Frame and Mobile Scaffolds. Where The Standards Are. Federal OSHA. Cal/OSHA. Who is in charge here?. Competent Person. Qualified Person. Training Requirements. Scaffold Inspections. Scaffold Inspections. General Requirements. Weight Limits.
E N D
Where The Standards Are Federal OSHA Cal/OSHA
Who is in charge here? Competent Person Qualified Person
Support Requirements Federal California
Base Plates and Mudsills Base Plates Mudsills
Access and Egress Do Do Not
Electrical Safety Insulated Lines Uninsulated Lines
Fall Protection Federal California
Questions A scaffold plank that has been used as a trench crossing point can later be used as a scaffold plank if it is cleaned. • True False If you didn’t build the scaffold, but you rented it, are you responsible for it? • Yes • No
Questions • Vertical ties are required every ____ feet for scaffold that is wider than 3 feet. • 26 feet • Note: California requires vertical ties every 26 feet regardless of width • Horizontal ties are required every: • 30 Feet
Questions • The first scaffold brace is required at which height? (Federal OSHA) • 3/1 • 4/1 • 2/1 • It is acceptable to lock 3 of the four wheels on a mobile scaffold. • True • False
Questions • Base plates are not needed on a frame scaffold if it is on solid ground, such as concrete. • True • False • Fall protection is required at _____ feet Federal and ______ California. • 10 feet and 7.5 feet