1 / 13

Status of the TTCE-EGSE and Power Supply

Status of the TTCE-EGSE and Power Supply. Mauro Menichelli INFN Perugia. Summary. Status of the pump,valves and pressure sensors emulator Status of the heater and peltier emulator Status of the TTCE-EGSE System Short status report on tracker power supply.

hetal
Download Presentation

Status of the TTCE-EGSE and Power Supply

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Status of the TTCE-EGSE and Power Supply Mauro Menichelli INFN Perugia

  2. Summary • Status of the pump,valves and pressure sensors emulator • Status of the heater and peltier emulator • Status of the TTCE-EGSE System • Short status report on tracker power supply

  3. Status of the pump,valves and pressure sensors emulator • H/W ready analog part tested firmware and software under developement

  4. Pump,valves and pressure sensors emulator board

  5. Status of the heater and peltier emulator • H/W ready under analog test.

  6. The power part I

  7. The power part II

  8. The readout part I

  9. The readout part II

  10. Status of the system I • We are including the F/W and the S/W that controls the pump,valve and PS emulator in the controller board • After the analog test we will start this F/W and S/W integration also for the heater and peltier emulator

  11. Staus of the system II

  12. Conclusions on TTCE-EGSE • The hardware construction of the TTCE EGSE is finished • The F/W and the S/W of the Pump,valves and pressure sensors emulator board is ongoing • The test of the heater and peltier emulator has started • Phase I completed by mid-february

  13. Short status of tracker power supply • FM under construction and test • DC/DC converters for tracker • S9051 (40/40 built 25 ready and tested) • S9053 (20/20 built test is ongoing) • S9055 (20/20 built test is ongoing) • Linear regulator boards • TPSFE (28/40 built and waiting for re-work) • TBS (20/20 built and waiting for re-work)

More Related