1 / 41

Lab Equipment

Lab Equipment. Safety goggles. Beaker. Beakers hold solids or liquids that will not release gases when reacted or are unlikely to splatter if stirred or heated. Erlenmeyer Flask.

holli
Download Presentation

Lab Equipment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lab Equipment

  2. Safety goggles

  3. Beaker Beakers hold solids or liquids that will not release gases when reacted or are unlikely to splatter if stirred or heated.

  4. Erlenmeyer Flask Erlenmeyer flasks hold solids or liquids that may release gases during a reaction or that are likely to splatter if stirred or heated.

  5. Florence Flask Rarely used in first year chemistry, it is used for the mixing of chemicals. Narrow neck prevents splash exposure.

  6. Volumetric Flask Volumetric flasks are used to accurately prepare solutions for chemistry. This piece of glassware is characterized by a long neck with a line for measuring a specified volume.

  7. Graduated Cylinder A graduated cylinder is used to measure volumes of liquids. (the yellow collar stays near the top to prevent breakage)

  8. Test Tubes 13 x 100 mm test tubes Ignition tube 10 x 75 mm test tubes

  9. Test Tube Holder A test tube holder is useful for holding a test tube which is too hot to handle.

  10. Test Tube Brushes Test tube brushes are used to clean test tubes and graduated cylinders. Forcing a large brush into a small test tube will often break the tube.

  11. Test Tube Racks Test tube racks are for holding and organizing test tubes on the laboratory counter. Plastic racks may melt in contact with very hot test tubes.

  12. Rubber Stoppers Rubber stoppers are used to close containers to avoid spillage or contamination. Containers should never be heated when there is a stopper in place.

  13. Spot Plates Spot plates are used when we want to perform many small scale reactions at one time. We will use these many times during the year.

  14. Watch Glass A watch glass is used to hold a small amount of solid, such as the product of a reaction.

  15. Glass Stir Rod A glass rod is used to manually stir solutions. It can also be used to transfer a single drop of a solution.

  16. Medicine Dropper A medicine dropper is used to transfer a small volume of liquid (less than one mL). On top of each medicine dropper is a “rubber bulb”

  17. Litmus Paper Red litmus paper is used to identify bases. Blue litmus paper is used to identify acids.

  18. Forceps Forceps (or tweezers) are used to pick up small objects.

  19. Funnel A funnel is used to aid in the transfer of liquid from one vessel to another.

  20. Mohr Pipet A Mohr pipet measures and delivers exact volumes of liquids. It is used with a bulb or a pipet pump.

  21. Buret Used for delivering exacting amounts of solution in a titration.

  22. Wash Bottle A wash bottle has a spout that delivers a wash solution to a specific area. Distilled water is the only liquid that should be used in a wash bottle.

  23. Mortar and Pestle This white stone mortar and pestle is used to used to crush, grind, and mix solid substances.

  24. Weighing Boat Weighing boats are used to weigh solids that will be transferred to another vessel.

  25. Spatulas Spatulas are used to dispense solid chemicals from their containers. Chemicals should never be transferred with your bare hands.

  26. Scoopula Scoops out chemicals from their containers.

  27. Beaker Tongs Beaker tongs are used to move beakers containing hot liquids

  28. Bunsen Burner Bunsen burners are used for the heating of nonvolatile liquids and solids.

  29. Evaporating Dish The evaporating dish is used for the heating of stable solid compounds and elements.

  30. Crucible Crucibles are used for heating certain solids, particularly metals, to very high temperatures.

  31. Clay Triangle The clay triangle is used as a support for porcelein crucibles when being heated over a Bunsen burner.

  32. Crucible Tongs For handling hot crucibles; also used to pick up other hot objects. NOT to be used for picking up beakers!

  33. Ringstands and their Components Ringstands are a safe and convenient way to perform reactions that require heating using a Bunsen burner.

  34. Ringstands and their ComponentsIron Rings Iron rings connect to a ringstand and provide a stable, elevated platform for the reaction.

  35. Ringstands and their ComponentsUtility Clamps Utility clamps are used to secure test tubes, distillation columns, and burets to the ringstand.

  36. Ringstands and their ComponentsDouble Buret Clamps Double Buret clamps are used to burets – long graduated tubes used in titration.

  37. Ringstands and their ComponentsWire Gauze Wire gauze sits on the iron ring to provide a place to stand a beaker. On older wire gauze, the white material is asbestos!

  38. Strikers Strikers are used to light Bunsen burners. The flints on strikers are expensive. Do not operate the striker repeatedly just to see the sparks!

  39. Water bath set up Ring stand, iron ring, wire gauze and Bunsen burner for heating or cooling (w/o burner)

  40. Titration Set up Stand, buret clamp, buret, beaker Used for determining the concentration of a substance in solution by adding to it a standard reagent of known concentration.

  41. Crucible Set up

More Related