120 likes | 229 Views
Integrated lidar backscatter: Quantifying the occurrence of supercooled water and specular reflection. Robin Hogan and Anthony Illingworth Enhanced algorithm for supercooled water detection (Hogan et al. 2003, QJ in press)
E N D
Integrated lidar backscatter:Quantifying the occurrence of supercooled water andspecular reflection Robin Hogan and Anthony Illingworth • Enhanced algorithm for supercooled water detection (Hogan et al. 2003, QJ in press) • Specular reflection could be a problem for nadir-pointing EarthCARE lidar: how common is it?
Introduction • The integrated backscatter through a cloud of optical depth of is approximately (Platt 1973): • k is the extinction/backscatter ratio (18.75 sr for droplets) • is the multiple scattering factor (~0.7 for the CT75K) • For large optical depth it reduces to (2k)-1 • If z1 and z2 encompass the 300 m around the strongest echo in a profile, we can identify thin liquid water layers with greater than, say, 0.7
Results for lidar 5° from zenith • Chilbolton 2000 • Occurrence of supercooled layers with > 0.7
Results for zenith pointing lidar • Chilbolton 1999 • Enhanced occurrence between -10 and -20°C
Supercooled water in models • A year of data from the Met Office and ECMWF • Easy to calculate occurrence of supercooled water with > 0.7
Specular reflection • Specular reflection from planar crystals can occur within 1° from zenith or nadir • Enhanced backscatter with no accompanying increase in extinction: very low k • Integrated backscatter in ice can exceed the asymptote corresponding to optically thick liquid cloud (recall ~(2k)-1) • To quantify, require lidar to be precisely at zenith: 20 days of data obtained so far at Chilbolton • Algorithm calculates integrated backscatter from 2 km up • Specular reflection deemed to occur if this integral is more than 1.05 times the asymptote for liquid water • Excess above this value is attributed to pixels with highest • But allowance made for common scenario of liquid above ice
Results • Around 23% of ice cloudy profiles strongly affected • Specular reflection in 20% of cloudy pixels at 4 km • Big problem for interpreting backscatter measurements • Must analyse more data • Use model for temperature: specular reflection only for plates between -9 and -23°C?