How To Professionally Maintain The Cisco 10G SR SFP Module

1. How To Professionally Maintain The Cisco 10G SR SFP Module? As a key technical component of a data center, transceivers do require maintenance to work efficiently and render a constant network with no disruption. Modules like Cisco 10G SR SFP transceivers play a key role in the efficient operation of a data center. To ensure the technical disruption free operation in your data center you may always want the transceiver to perform unconditionally well. However, if you’re expecting a durable performance, then you may also need to give your efforts to maintain it like a pro. You need to take extreme care when handling the Cisco SFP compatible transceivers to ensure

2. they don’t get damaged. Keep one thing in mind that sometimes over the limit performance of the transceivers can also be a reason for their breakdown. So, you need to make the best out of the transceivers like Cisco 10gbase t SFP+, but do not overuse it that may be held become responsible for its breakdown. In this post, we will let you know the right process to maintain the transceiver to enhance its function and durability. Following mentioned are the routine maintenance procedures of the Cisco 10g SR SFP modules. Cleaning Method The best and safe method for cleaning the SFP module is to use a CDA stream to blow away the dust particles from the surface of the transceivers and ports. Follow these tips to ensure the effective operational performance of the Cisco SFP modules in your data center. Follow the ESD (Electrostatic Discharge) safety precautionary-stated measures while handling the optical modules Turn off the power of the Cisco 10g sr SFP module before cleaning to avoid getting the electric shock or network failure. Deploy CDA or third-party vendor certified canned compressed air Keep the compressed air stand upright as tipping can result in liquids in the air stream and it will cause contamination where you have installed the transceiver and other components. Do not touch the transceiver’s inner surfaces, including the sub-assemblies.

3. Don’t put any other objects inside the port Steps For Cleaning The Cisco Transceiver Modules Make use of the CDA to blow the inner barrel of the transceiver sub-assemblies and transmitter to remove the dust particles. Use a microscope lens to check the surface of the transceiver under high-intensity light. If you detect any contaminants, repeat the cleaning process again using the CDA but be careful while cleaning. As you are dealing with a sensitive element like a transceiver, you have to be careful and diligent too. Hopefully, the post will prove helpful to you when it comes to maintaining the transceiver. Do follow these guides to ensure the optimal performance and function of the transceiver. The more you take the professional care of Cisco modules, the better results it will endure.