1 / 8

Wireless Gateway HDL-MCIP-RF02.10

Wireless Gateway HDL-MCIP-RF02.10. Notes. Connections : Buspro, Ethernet, Buspro wireless Work Mode : Mesh mode or Bridge mode Wireless communication distance : 50m (barrier free) Transmision power: 10dBm(10mw) Installation : wall hang or table top

humeb
Download Presentation

Wireless Gateway HDL-MCIP-RF02.10

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wireless Gateway HDL-MCIP-RF02.10

  2. Notes Connections: Buspro, Ethernet, Buspro wireless Work Mode: Mesh mode or Bridge mode Wireless communication distance: 50m (barrier free) Transmision power:10dBm(10mw) Installation: wall hang or table top Frequency channel: WPAN for China (780MHz – 786MHz); SRD fro Europe (864MHz – 870MHz); ISM for North America (904MHz – 928MHz) Encryption: AES

  3. Wireless Settings IP information: Set the IP address and IP MAC, make them unique in your network. Frequency channel: WPAN for China (780MHz – 786MHz); SRD fro Europe (864MHz – 870MHz); ISM for North America (904MHz – 928MHz) Password: To increase the security of the wireless network, change the default password.

  4. Network There are three types for the network connection, select one of them to allow you accessing your system locally or remotely.

  5. Mesh Mode Mesh mode - in mesh mode each connected device will function as a signal repeater. This increases both the data transmission reliability, and the signal integrity. Buspro Subnet ID - set the ID for its buspro subnet, these wired devices should use this subnet ID so that can be managed by the gateway.

  6. Mesh Mode Filter: Filter some commands to make the system communnication more effective.

  7. Bridge Mode Bridge mode - The bridge mode can be used as an alternative to an Ethernet cable, allowing different floors and rooms to be linked.

More Related