1 / 26

#6 in Mid-Term

#6 in Mid-Term. Most answered: many users thru the same bottleneck -> increased queueing delay -> increased e2e latency Possible reasons behind much delay queueing delay on a bottleneck link retransmission delay due to packet losses server located far away; increased prop delay

illana-lindsay
Download Presentation

#6 in Mid-Term

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. #6 in Mid-Term • Most answered: • many users thru the same bottleneck -> increased queueing delay -> increased e2e latency • Possible reasons behind much delay • queueing delay on a bottleneck link • retransmission delay due to packet losses • server located far away; increased prop delay • server located on a slow network; increased tx delay • server overload • How to detect a bottleneck? • traceroute • comparison with other downlaods • assume a role of a network manager: more info available

  2. 2004.5.6. • Last Class • TCP connection set up • TCP connection tear-down • Sliding window revisited • This Class • Triggering transmission

  3. Triggering Transmission • TCP has to decide when to tx

  4. TCP Send Buffer Sending Application TCP LastByteWritten LastByteSent LastByteAcked

  5. Triggering Transmission • TCP has to decide when to tx • When it has more than MSS • When it is told “PUSH” • When a timer expires * Without worrying about flow control

  6. Silly Window Syndrome • When AdvertisedWindow < MSS • if sender transmits aggressively

  7. Silly Window Sender Receiver ACK opens win=10 ACK data=10 opens win=1000 ACK data=1000 data=10

  8. Silly Window Syndrome • When AdvertisedWindow < MSS • if sender transmits aggressively • How to avoid it? • not to introduce a small segment • receiver waits till MSS space is available before advertizing a window open from zero

  9. Then what about Telnet? • What should we do when we have only a few bytes to send? • use a clock-based timer or self-clocking • Nagle’s Algorithm if available data and window >= MSS send a full segment else if unACKed data in flight buffer new data till a new ACK else send all the new data now

  10. Adaptive Retransmission • RTT estimation EstRTT = a X EstRTT + (1-a) x SampleRTT TO = 2 x EstRTT • Karn/Patridge Algorithm SampleRTT for those segments sent only once • Jacobson/Karels Algorithm • Take the variance of SampleRTT into consideration Diff = SampleRTT – EstRTT EstRTT = EstRTT + (b x Diff) Dev = Dev + b(|Diff|-Dev) TO = A x EstRTT + B x Dev

  11. TCP Header 15 16 0 31 Source Port Number Destination Port Number Sequence Number Acknowledgement Number Header Length A C K P S H U R G R S T S Y N F I N Reserved Window Size TCP Checksum Urgent Pointer

  12. TCP Extension • TCP 32-bit Sequence Number • Add a 32-bit timestamp • TCP 16-bit Window Size • Add a scaling factor • Timestamp • course timer granularity = 500ms • Add a system clock to the data pkt

  13. Keeping the pipe full • Time until 32-bit number space wraps around • 1.5 Mbps – 6.4 hr • 100 Mbps – 13 min • 1.2 Gbps – 28 sec • Window size for 100 ms RTT • 1.5 Mbps – 18 KB • 100 Mbps – 1.2 MB • 1.2 Gbps – 14.8 MB

  14. Alternative Design Choices • TCP is not a panacea for all applications • Consider • Explicit connection setup/tear-down • Byte-stream vs message-stream • window-based vs rate-based

  15. Congestion Control • End-to-end approach in detecting congestion • No ack for some time • Duplicate acks • Network-assisted approach • Routers provide explicit feedback • IBM SNA, DEC DECnet, ATM ABR, TCP ECN

  16. Scheduling vs. Drop Policies • Schduling policy • determines the order in which packets are transmitted • FIFO, Priority Queueing, Fair Queueing • Drop policy • determines which packets to drop • Tail drop (drop-tail), RED

  17. FIFO

  18. Priority Queueing • Main idea: mark each packet with a priority • Routers implement multiple FIFO queues • Packets in a queue with the highest priority are served first • Problem? • Bad people mark their packets with a high priority • High-priority queue can starve out all other queues

  19. Fair Queueing • Main idea: maintain a separate queue per flow to isolate. Round-robin Service

  20. Currently served • Calculate Fi =max(Fi-1 , Ai) + Pi and process packets with lowest Fi first • Fi : expected finish time if done bit-by-bit • Ai: arrival time of packet i • Pi : # of bit-rounds for packet i Which packet should finish first, blue or yellow?

  21. F F F Yellow should be served first! Time 1 2 3 4 5 6 7 9 8 Bit-round

  22. FQ and WFQ • FQ • Sources are not aware of FQ • WFQ • It assigns different weights to queues • It can assign queue not per flow, but per class • How do you assign fair weights? • Both are work-conserving • Never idle when there is work to do

  23. At what rate to send? sender receiver How do you figure out the bottleneck bandwidth?

  24. Sending rate increases linearly Additive increase TIME RTT RTT RTT RTT

  25. What about doubling each time? Multiplicative increase Cwnd=1 Cwnd=2 Cwnd=4 Cwnd=8 TIME RTT RTT RTT RTT

  26. When to stop increasing? • Finite world, finite beginning • ssthresh = set to an arbitrary large number (65KB) • Sender rate exceeds RcvWindow • Only transmit min(cwnd, RcvWindow) • Packets start to be dropped at the bottleneck • Sending rate exceeds bottleneck b/w • Another user shares the bottleneck • Contention for shared resource

More Related