1 / 24

Ethernet over Multi E1 (4 / 8 / 16 E1) Product Presentation

Ethernet over Multi E1 (4 / 8 / 16 E1) Product Presentation. Updated: May, 2013. Product Overview. Ethernet over Multi E1 Converter allows the user to connect to Ethernet sites over point to point E1 link / links

irina
Download Presentation

Ethernet over Multi E1 (4 / 8 / 16 E1) Product Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ethernet over Multi E1 (4 / 8 / 16 E1) Product Presentation Updated: May, 2013

  2. Product Overview • Ethernet over Multi E1 Converter allows the user to connect to Ethernet sites over point to point E1 link / links • The device can effectively utilize the existing TDM network to transport Ethernet data with low investment. • One or more than one (up to 16) E1 links can be used to carry the Ethernet data over E1 link as per the application requirement • Flexible Interface options - E1 (120 / 75 Ohms) and Ethernet (Optical / Electrical) • E1 Options - Available in 4E1, 8E1 and 16E1 port versions • Ethernet Options – 4 Electrical or 1 Optical + 3 Electrical • LCAS feature supported to adjust the bandwidth automatically according the availability of E1 links without disturbing the current running services.

  3. Product Overview • IEEE 802.1Q and 802.1P based QoS features supported • Redundant Power supply option available in AC + DC configuration • Plug and play for the simple point to point application (No configurations required).

  4. Features and Highlights • Provides 4 Ethernet 10/100BaseT (Electrical) Ports for each converter • Provides 3 Ethernet 10/100BaseT (Electrical) Ports and 1 Ethernet (Optical) Port for each converter – (Optional) • Supports Auto Adaptive three working modes of E1 transmission. Un-Framed (Transparent), Framed PCM 30 and Framed PCM 31 formats • Supports VCAT (virtual concatenation) and LCAS (link capacity adjustment scheme) protocol, and complies with ITU-T G.7042 Specifications • Mapping to E1 complies with ITU-T G.7043 and G.8040 specifications • Supports VLAN tagging as per 802.1Q • Supports 802.1 based QoS feature • Supports base priority classification for incoming 802.1Q packets • Supports IEEE 802.1p standard recommended Class of Service traffic categorization.

  5. Features and Highlights • Supports 802.1p priority classification for ingress packets • Provides 4 different user selectable ratios (0:1, 1:2, 1:5 and 1:10) for delivery of high and low priority packets • Supports 802.1 p based classification of 802.1Q based VLAN Packets which provides a Mechanism for implementing Quality of Service (QoS) • User selectable ports for enabling / disabling the QoS service • Supports port based priority if the Equipment fails to classify the 802.1Q packets • Supports port based Ethernet bandwidth limit for ingress traffic • Port based Ethernet limit allows user to provide different speed for the different customers to utilize bandwidth according to their requirement • Supports differential delay of up to 120ms on E1 Links • Complies with IEEE 802.3 specifications.

  6. Features and Highlights • Supports X.86, LAPS and HDLC transmission protocols • Supports 10M / 100M, Half / Full duplex and auto-negotiate mode • Frame size 1916 bytes (MTU size) • Supports GFP-F encapsulation complying with ITU-T G.7041 • Supports port based Ethernet bandwidth limit for ingress traffic • Port based Ethernet limit allows user to provide different speed for the different customers to utilize bandwidth according to their requirement • Supports differential delay of up to 120ms on E1 Links • Complies with IEEE 802.3 specifications • Supports X.86, LAPS and HDLC transmission protocols • Supports 10M / 100M, Half / Full duplex and auto-negotiate mode • Frame size 1916 bytes (MTU size).

  7. Features and Highlights • Supports GFP-F encapsulation complying with ITU-T G.7041 • Provides Automatic smooth adjustment of Ethernet bandwidth as per the availability of carrier (E1) links • Provides visual alarm (LEDs) • Alarm Display select switch • Provides error frame statistic • Supports automatic removal and addition of E1 Links without interrupting current services • Available with MAC address list filtration, learning and updating functions • A large external SDRAM buffering for handling data bursts • E1 Interfaces support errors count • Supports two synchronization clock modes, Internal clock and Network clock (Loop-Timed clock).

  8. Management and Maintenance • Management and Maintenance interfaces • 10/100BaseT Ethernet management interface • RS232 serial management interface • Remote (Telnet) management interface • Windows XP based Graphical User Interface (GUI) • Windows 7 based Graphical User Interface (GUI) • SNMP V2 Monitoring • Engineering Order Wire (EOW) interface (RJ-11) • NMS (Network Management System) for monitoring multiple units from a single / central location.

  9. Alarms and Indicator Monitoring • Power Indicator • General Alarm Indicator for E1 and Ethernet Link • Descriptive E1 alarm by alarms select DIP switch • E1 Alarm for individual E1 port (1-16) • Code Violation History (CV_HIS) Alarm on E1 port • Loss Of Signal (LOS) Alarm on E1 port • Group ID (GID) mismatch alarm • Generic Framing Procedure (GFP_LOF) Loss Of Frame Alarm • Ethernet Link Indicator • Ethernet Speed Indicator • Ethernet History Error Alarm (ETH_ERR) • SNMP Diagnostic and Monitoring.

  10. Applications • The equipment may be used for the following purposes: • Bridging Ethernet LANs over existing TDM (E1) telecom network. • Extending Ethernet networks utilizing TDM (E1) landline based telecom infrastructure • Using telecom network of E1s/PDH/SDH microwave etc. carrying E1s to transport Ethernet data • Interconnecting DSLAMS to Central Routers over PDH/SDH telecom networks • Interconnecting IP based GSM base stations • Interconnecting Wi-Max base stations • In all cases the equipment must be always installed and used in pairs, with one terminal being installed at either end of the network.

  11. Application Diagram Point to point network (Shared Link Mode) LAN LAN TDM Network E1 Link E1 Link LAN LAN Ethernet over Multi E1 Ethernet over Multi E1 ROUTER ROUTER ROUTER ROUTER

  12. Application Diagram Point to point network (Discrete Link Mode) LAN LAN TDM Network E1 Link E1 Link LAN LAN Ethernet over Multi E1 Ethernet over Multi E1 ROUTER ROUTER ROUTER ROUTER

  13. Front Panel Description

  14. Global Indicators PWR (Green) Power indicator ALM Indication Of General Alarm CV_HIS Code Violation history LOA Indication for threshold exceeding of the differential delay GID Indication for the mismatch of the Group ID GFP_LOF Indication for the Loss of Frame (LOF) of Generic Framing Procedure ETH_ERR Indication of historical Ethernet error Tributary Status Indicators LED’s 1-16 E1 Tributary Status

  15. Display Select Switches LOS Show LOS of E1 Signal – ON / OFF CV Show Code Violationof E1 – ON / OFF AIS Show AISon E1 Tributary – ON / OFF LOF Show Loss Of Frameson E1 Tributary – ON / OFF ERR_OVER BER exceeding threshold – ON / OFF CRC4 Framing (CRC4) Error – ON / OFF EX_LOOP E1 Tributary Loop Back – ON / OFF VCAT_ERR VCAT Alarm – ON / OFF Config Switch RLOOP Enable / Disable Remote Loop Back ADDR0-3 NE Address Switch

  16. Other Switches and Ports Masking Switch Mask / Unmask the E1 alarms Power Power ON / OFF Switch RS232 Management RS232 Management Port EMU Ethernet Management Port for Telnet and SNMP

  17. Back Panel Description Ethernet (Electrical) and E1 (120 Ohms - RJ45)

  18. Back Panel Description Ethernet (1 Optical + 3 Electrical) and E1 (120 Ohms - RJ45)

  19. Back Panel Description Ethernet (Electrical) and E1 (75 Ohms - BNC)

  20. Back Panel Description Ethernet (1 Optical + 3 Electrical) and E1 (75 Ohms - BNC)

  21. AC and DC Power Supply Power Slot Two power Sockets, one for 110V AC - 240V AC (50/60 Hz), the other is -48V DC in 1+1 Redundant mode. Ethernet Interface Options • All 4 Electrical Ethernet Ports – Standard configurations • 3 Electrical + 1 Optical Ethernet Ports - Optional E1 Interface Options • 120 Ohms – RJ 45 • 75 Ohms - BNC

  22. Management Options • Easy to use CLI commands through RS232 serial connection and TCP/IP TELNET connection • SNMP V2 Management through MIB browser • DIP switch settings given on front panel • Windows XP / Windows 7 based GUI (Graphical User Interface) to access the equipment over RS232 serial connection, TCP/IP and SNMP protocol. Alarms and Indicator Monitoring • SNMP based Alarms (TRAPS) event monitoring through MIB browser and NMS • Visual alarm indicators in the front panel • Ethernet (Data) port speed and mode status.

  23. NMS (Networks Management System) built in GUI • Monitoring and Managing multiple systems from a central location over RS232 serial connection (Local) TCP/IP TELNET and SNMP (LAN or Remotely)

  24. Thank you for your attention For more details visit us at our Website at http://www.valiantcom.com INDIA Valiant Communications Limited71/1, Shivaji Marg, New Delhi - 110015, India SOLD BY: Aries Telecom and Trading Corp. FZE PO Box 31291, Al-Jazeera Al-Hamra, Ras Al Khaimah, U.A.E. Ph: +971 56 1361308 E-mail: sales@ariestelecom.com Website: http://www.ariestelecom.com Website: http://www.valiantcom.com U.K. Valiant Communications (UK) Ltd 1, Acton Hill Mews, 310-328 Uxbridge Road, London W3 9QN, United Kingdom U.S.A. Valcomm Technologies Inc. 4000 Ponce de Leon, Suite 470Coral Gables, FL 33146United States of America Website: http://www.valiantcom.com Website: http://www.valiantcom.com

More Related