70 likes | 327 Views
Titration Experiment Preview by Jennifer Klein-Wackerla. Titration Experiment Preview. This is a preview of the titration experiment we will be doing in class. Look through the following slides to get familiar with the setup of the lab.
E N D
Titration Experiment Preview • This is a preview of the titration experiment we will be doing in class. • Look through the following slides to get familiar with the setup of the lab. • If necessary, print off the slides for a guide while performing the experiment.
Titration Experiment Preview • A ring stand, a clamp, a burette, a 250mL flask, a funnel, and a white sheet of paper are required materials • The materials should be assembled as the picture shows.
Titration Experiment Preview • Using the funnel at the top, fill the burette with the HCl solution. • Be sure the stopcock of the burette is closed! • In the flask place the weighed TRIS, the distilled water, and 5 drops of the indicator.
Titration Experiment Preview • Begin the titration by opening the stopcock to make the HCl solution flow dropwise into the flask. • Be sure to swirl the flask constantly so the solutions mix thoroughly.
Titration Experiment Preview • Continue to add HCl solution to the flask until a color change begins (blue to green) • At this point, slow the flow even more. You actually want the solution to be more green than yellow (over titrated shown.)
Titration Experiment Preview • This titration went past the equivalence point. The color should have been more greenish-yellow. • If you get a solution as yellow as the one shown, you must redo the titration.