1 / 31

AutroSafe SelfVerify Interactive Fire & Gas Detection System

AutroSafe SelfVerify Interactive Fire & Gas Detection System. ID: ASAFE_intro_Eng, 2007-09. Overview and a brief introduction of;. Reference to traditional systems The AutroSafe system Background for development – IEC EN54 AutroSafe terminology Features introduction SelfVerify

ita
Download Presentation

AutroSafe SelfVerify Interactive Fire & Gas Detection System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AutroSafe SelfVerifyInteractive Fire & Gas Detection System ID: ASAFE_intro_Eng, 2007-09

  2. Overview and a brief introduction of; • Reference to traditional systems • The AutroSafe system • Background for development – IEC EN54 • AutroSafe terminology • Features introduction • SelfVerify • System Integrity (SIL) • Reliability • Communication • Software Tools

  3. BRANN Traditional Analogue Addressable Fire-Alarm Systems BU-100 5th Deck BU-70 4th Deck BU-100 3rd Deck BU-70 2nd Deck BU-100 LER CCR 1st Deck Utility Deck DYNAMIC FILTER PROCESS

  4. AutroSafe SelfVerify Interactive Fire-& Gas Detection System Corridor LER 5th deck Corridor LER 4th deck Corridor LER 3rd deck Corridor LER 2nd deck CCR LER 1st deck AUTROLON Utility-deck

  5. Traditional F & G System AutroSafe DCS system Operator Station Standard Loop Units Node 1 Redundant Network Node 2 Node 3 Node 4 Node 5 Node 6 EX Loop Units AutroPoint AutroFlame Third party detectors Kidde Fenwal Analaser II Third party detectors AutroPathHC600 RX Simrad AutroPathHC600 TX AutroFlame CCTV

  6. AutroSafe Panel (TCP/IP) AutroOS AutroSafe Panel AutroSafe IFG ModBus To Process AutroSafe Controller Control System Al_Com AutroLON loop Standard AutroSafe loop units Information/ Barrier unit Repeater BZ-500 panel BSD-340 AutroFieldBus AutroSafe EX loop units BSD-321 PowerLoop AutroFlame Video X33/1 PL BN-342 (4-20mA) Third-party Detector Third-party Detector Kidde Fenwal Analaser II AutroPath HC600 AutroFlame CCTV

  7. AutroSafe and EN 54 • AutroSafe:Developed and approved in accordance with EN 54-2 and EN 54-4 • AutroSafe:Considers the demands of future EN 54 norms • AutroSafe:Exploits all the possibilities of EN 54 (American equivalent is NFPA 72 – AutroSafe is also FM approved – thus tested and approved against NFPA 72)

  8. Features, Performance, Functionality.. • Interactive loop Communication • Automatic addressing • Intelligent field devices • Increased reliability – key terms: • SelfVerify TM • DYFI+ (Dynamic Filter Process) • Built-in Short circuit isolators • Loop topology • Fail-safe loop communication • Roughed loop communication

  9. DECK 3, CORRIDOR Heat Detector DECK 3, LER SOUTH Smoke Detector Operator panel DZ-2 AZ-1 DZ-1 CCR Optical Smoke Detector DZ-3 FWRE AK2 AK1 FARE OZ-1 AZ-2 = DZ: Detection zone WORKSHOP Multi-sensor Detector = AZ: Alarm zone AZ-3 DZ-4 = OZ: Operation zone Terminology – mostly based on EN54 Some examples:

  10. AutroSafe SelfVerify System Panels Maximum flexibility: Easy to read, understand and operate Fire & Gas Alarm panel Operator Panel Repeater Panel Information Panel Controller

  11. AutroLON AutroLON • AutroSafe panels in a Ring loop • Short-circuit isolators in every panel – all panels will continue to operate even with a single break or short circuit on the AutroLON • Maximum 32 panels in one LON-ring (but needs a Booster for each 8th panel) • Fibre-optic modems available (3000 meters between two panels) Back to main page

  12. AutroSafe Panel • A complete fire and gas control panel with full operatorcapabilities • Supports up to 6 fire detection loops and 1 AutroFieldBus • 2 AutroCom Serial, 1 AutroCom Ethernet (TCP/IP) • Outputs and inputs, monitored or unmonitored Back to main page

  13. AutroSafe Controller • Serves as a connection unit for detection loops (maximum 6) • 1 AutroFieldBus • 2 AutroCom Serial, 1 AutroCom Ethernet • Outputs and inputs, monitored or unmonitored • Communicates with other system units on AUTROLON Back to main page

  14. AutroSafe Information/ Repeater Panel Information Panel • Serves as an indication device only • Provides information related to the defined operation zone(s). Repeater Panel • Displays alarms and allows operation of alarms and receipt of additional information related to the relevant operation zone Back to main page

  15. AutroSafe SelfVerify, a Modular System A variety of DIN rail mounted I/O modules available.. • Loop drivers • Digital output modules • 24V alarm output modules • Digital input modules

  16. A Wide Range of Products for All Applications Optical smoke detectors High-sensitivity smoke detectors Series Multisensor smoke detectors Heat detectors Interface/ address units Manual Call-points Sounder Units Series 200 Standard Interactive- Addressable units Series 300 With SelfVerify® functions Series 500 With special protection for marine, offshore, Exi applications

  17. AL_Com Loop AL_Com Loop • Ring loop-topology with detectors, I/O interfaces and sounders • Short-circuit isolators in every loop unit – all detectors and interfaces will continue to operate even with a single break or short circuit on the AL_Com Loop • One branch between two units on the main loop • All ‘decisions’ made by loop unit, event messages sent to panel • Fail-safe operation if communication fails. Back to main page

  18. Standard AutroSafe Loop Units • The detection loop is connected directly to the Loop Driver Module • All types and series of AutroSafe detectors, manual call-points and I/O units can be connected to the same detection loop (99 det/mcp + 27 I/O) Back to main page

  19. AutroSafe EX Loop • Connected to one barrier (branch) between two units on the main loop • Maximum 20 EX-units on one branch • Most Autronica-detectors and I/O-units are produced in EX-versions Back to main page

  20. Large Assortment of I/O Units A number of loop controls and Interface units are available • Disablement input-units • Interface units for alarm and faults • Door control and monitoring units • Output control unit • General monitoring and control units • Sprinkler monitoring units

  21. BSL-330/X • Interfaces on-site third-party systems • The following messages can be transmitted (from/to an AutroSafe fire-alarm panel): • fire alarms • pre-alarms • faults • technical alarms from I/O units and event handling from third-party devices • Four different versions Back to main page

  22. AutroCom directly to DCS • ABB AC400 • ABB AC800 • Siemens • Kongsberg • Emerson • Hima Advantages of direct communication and propriatary protocol: Fuctionality and SIL!

  23. AutroOS • Aremote monitoring and control system thatenables full operation of the AutroSafe fire-alarm panels • All alarms, faults, inhibits, overrides and outputs can bemonitored and controlled from the AutroOS stations • Video from CCTV flame cameras • Microsoft Windows platform Back to main page

  24. AutroSafe Sys. & Utility Software Package • AS Configuration Tool • Merge Tool • Power Calculators • Import/Export Tools • Download Tools • AS I/O Simulator Tool • The perfect Application Software verification Tool • Loop Diagnostics Tool • WAS-2000 and AS-2000

  25. What is SelfVerify®? SelfVerify® function:The detectors are tested once every 24 hours with a calibrated signal

  26. Power Supply Detector Loop Communication interface Fault Warning Fault Signal ALARM! Fire Alarm Fire Alarm Signal STOP! Detector smoke chamber Alarm signal Standard Analogue Addressable Fire-Alarm System Power supply Monitored parts Communication interface Non-Calibrated test Smoke detector Fault warning Fault signal Fire Alarm Fire Alarm signal Operation Detector test with test gas Alarm signal

  27. Fail-safe detectors give increased reliability, and reduce maintenance costs dramatically Power supply Communication- interface SV- control Smoke detector Fault warning Fault signal ALARM! Fire Alarm Fire Alarm Signal Calibrated test Detector smoke chamber STOP! SelfVerify® stimulator Operating Alarm- signal Monitored part SelfVerify®

  28. Why SelfVerify®? SelfVerify® – Reduces the need for manual testing is significantly

  29. System Integrity • R&D target for System Integrity: No single fault shall degrade system performance • SIL 2 (Safety Integrity Level2) in accordance with IEC-61508 (By TÛV and NEMCO)

  30. SIL 2 Certificates by TÛV and NEMCO

  31. American Bureau of Shipping • ATEX (NEMCO) • Bosec • BUREAU VERITAS AND AUTORITES MARITIMÈS FRANCAISES • China Compulsory Certification • China Classification Society • China National Quality Supervision and test centre for explosion protected electrical products • Dansk brand- og Sikringsteknisk Institut • Det Norske Veritas (DNV) • Forsikringsselskapenes Godkjenningsnevnd • FM APPROVALS • Germanischer Lloyd • Japanese Government • Lloyd's Register of Shipping Comprehensive list of Approvals • Maritime and Coastguard Agency • Nonprofit Independent Research Organisation “Certification Centre of Explosion-proof and Mine Electrical Equipment" - Nanio “CCVE" • Nippon Kaiji Kyokai • Polski rejestr Statków • Registro Italiano Navale • Russian Maritime register of Shipping • Svensk Brand- och Säkerhets Certifiering ab • United States Coast Guard • Vniipo/Gost

More Related