1 / 31

A Solid-state Hand-held Neutron Radiation Sensor

A Solid-state Hand-held Neutron Radiation Sensor. Jennifer I. Brand*, Susan Hallbeck † , and Peter Dowben ◊ *College of Engineering and Technology, † Department of Industrial Management and Systems Engineering, ◊ Department of Physics and Astronomy, University of Nebraska-Lincoln.

jacinda
Download Presentation

A Solid-state Hand-held Neutron Radiation Sensor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Solid-state Hand-held Neutron Radiation Sensor Jennifer I. Brand*, Susan Hallbeck†, and Peter Dowben◊ *College of Engineering and Technology, †Department of Industrial Management and Systems Engineering, ◊Department of Physics and Astronomy, University of Nebraska-Lincoln Kevin Osberg, Nathan Schemm, and Sina Balkir Department of Electrical Engineering, University of Nebraska-Lincoln

  2. Outline • Overview of the boron carbide diode for neutron detection • Hand-held neutron detector • Integrated front-end circuitry • Hand-held device • Experimental results • Ongoing work and conclusion

  3. The Boron Carbide Diode as a Neutron Detection Sensor • Uses a specific isotope of boron, 10B, to detect neutrons

  4. Detection efficiency for Various Neutron Sensitive Materials

  5. Thin Neutron Detectors Semiconducting boron-carbide Conversion layer Neutron capture here yields no signal No electrical charges generated here by neutron capture Boron-10 + n Helium-4 Neutron capture that causes electrical charge generation Electrical charges generated by neutron capture products Lithium-7

  6. Thick Neutron Detectors Semiconducting boron-carbide Conversion layer Neutron capture here yields no signal No electrical charges generated here by neutron capture Boron-10 + n Helium-4 Neutron capture that causes electrical charge generation Electrical charges generated by neutron capture products Lithium-7

  7. History: Position paper on the device possibilities of a “theoretical” boron carbide semiconductor published jointly by the AEC and AFOSR 1958 Semiconducting Boron Deposition, by PECVD 1989 [J. Vac. Sci. Technol. A 7 (1989) 2796] Semiconducting Boron Carbide First Fabricated 1991 [Mat. Res. Soc. Symp. Proc. 190 (1991) 101–106] 1st BxCy U.S. Patent, Number 4,957,773 issued September 18th, 1990 Direct writing (single step CVD) of boron on a semiconductor substrate demonstrated 1991 [Applied Physics Lett.58 (1991) 607–609; chosen as a Synchrotron Radiation Center Highlight of 1992] First Boron Carbide/Silicon heterojunction diodes fabricated; 1992 boron carbide demonstrated to be an indirect adjustable band gap semiconductor material (0.7 eV < Eg < 1.9 eV) [Journ. Appl. Phys. 72 (1992) 4925–4933; Appl. Phys. A 58 (1994) 223–227] First boron carbide heterojunction fabricated by direct writing 1994 [Applied Phys. Lett.64 (1994) 1968–1970] 2nd BxCy US Patent, Number 5,468,978 issued Nov. 21, 1995

  8. First boron carbide transistor fabricated 1996 • [Appl. Phys. Lett.68 (1996) 1495-1497] • First Boron Carbide Esaki tunnel diode • [J. Vac. Sci. Technol. B 14 (1996) 2957-2960] 1996 • First Boron Carbide Homojunction diode, stability of devices demonstrated to 220 °C • [Appl. Phys. Lett.70 (1997) 1028-1030] 1997 • 3rd BxCy US Patent, Number 5,658,834 issued Aug. 19, 1997 • 4th BxCy US Patent, Number 6,025,611, issued Feb. 15, 2000 • First Boron Carbide/silicon carbide heterojunction, stability of devices demonstrated to 350 °C • [Appl. Phys. Lett.79 (2001) 4357-4359] 2001 • First Boron Carbide neutron detector • [Appl. Phys. Lett.80 (2002) 3644-3646] 2001 • 5th BxCy US Patent, Number 6,440,786, issued August 27, 2002 • 6th BxCy US Patent, Number 6,600,177, issued July 29, 2003 • First Heteroisomeric Diode and all boron carbide neutron detectors • [J. Phys. Cond. Matter16 (2004) L139-L146; Mat. Sci. Eng. B 135 (2006) 129] 2004 • First Neutronvoltaic 2004 • 7th BxCy US Patent, Number 6,771,730, issued August 3, 2004 • 8th BxCy US Patent, Number 6,774,013, issued August 10, 2004 • First All Solid State Hand Held Neutron Detector Prototype 2006 • [IEEE Sensors Journal6 (2006) 1531-1538]

  9. New Source Molecules for Boron Rich Semiconductors: J. Vac. Sci. Technol. A 10 (1992) 881 Icosahedron: most important strutural element of the boron-rich solids

  10. The Boron Carbide Diode • Semiconducting boron carbide used to create a neutron sensitive diode • p and n type layers formed from molecules identical in formula but different in arrangement • Reverse bias applied to the diode sweeps charges out of depletion region, creating detectable current pulses through the diode

  11. The Boron Carbide Diode • The diodes create a detectable, real-time response to a neutron capture • Resulting current pulses are in the range of hundreds of nanoamps for durations of 10 to 40 μsec, so the charge content is in the hundreds to thousands of fC

  12. The Hand-Held Neutron Detector Architecture

  13. Charge Sensitive Amplifier • Charge sensitive amplifier converts current pulses to voltage pulses • Acts as a lossy integrator with RC feedback network, and gain of ~|1/Cf| • Cf realized by on-chip poly1/poly2 capacitors • Transistor MF controls the resistive feedback to change time constant

  14. Charge Sensitive Amplifier Simulated diode pulses Charge amplifier output

  15. Charge Sensitive Amplifier • In this application, the charge amplifier does suffer from non-linear gain • For large width and/or low charge content pulses, the resistive feedback interferes with the charge to voltage conversion • Example: A 3000fC charge transfer in 1μsec, and a 3000fC charge transfer in 10 μ sec

  16. Charge Sensitive Amplifier

  17. Charge Sensitive Amplifier

  18. Charge Sensitive Amplifier • AMI 1.5 micron Standard CMOS Technology (1mm x 1mm die area) • Digitally selectable charge amplifier gain • Programmable bias voltages for tuning integrator time constant

  19. Hand-Held Unit • The hand-held was designed around an Atmel microcontroller • Microcontroller samples charge amplifier output at 1.3 Msamples/sec with 12-bit resolution • Custom software modules allow for real-time processing of the waveform to determine resulting charge transfer per neutron

  20. Hand-Held Unit • USB interface allows the hand-held to operate with computer for remote control and data capture • LCD display and rechargeable battery with a continuous operation time of 10 hours • Bias voltages for front-end can be controlled with 2mV of accuracy

  21. Experimental Results • Operation of front-end tested with RC differentiator circuit to model boron carbide diode • 5pF feedback capacitor gives ideal gain of 200μV/fC • Measured gain based on RC circuit simulation gives a gain of ~170μV/fC

  22. Experimental Results • Neutron testing was conducted with a paraffin moderated plutonium-beryllium source • Estimations of the source approximate the flux rate at 20 neutrons/msec over a 1cm2 area

  23. Experimental Results

  24. Experimental Results • In this example, there are approximately 10 counts observed above a 1V threshold in 10msec • Based on the estimated flux rate, this gives a detection efficiency of 5% • If the threshold is reduced to 0.9V, the efficiency approaches 20%

  25. Experimental Results • A typical measurement of particle detection applications is the pulse height spectra • Energy levels are quantized as channels, and each detected particle is assigned to a channel based on it’s energy • The number of events in each channel is then plotted versus the number of channels • The energy of the capture products is proportional to the amplitude of the resulting voltage pulse

  26. Experimental Results • The blue curve is the pulse height spectra measured by the hand-held detector • The bottom curve is the predicted spectra based on the boron carbide diode detection characteristics • The red curve was measured when neutrons were blocked from the diode

  27. Conclusions • Presented the complete design of a compact hand-held neutron detector • Experimental results verify the design approach and functionality • Real-time processing of the charge amplifier output agrees closely with predicted results

  28. Ongoing Work • 0.5μm version of the integrated front-end designed using Cadence • Includes externally configurable filter to bandlimit output signal

  29. Ongoing Work • Second generation hand-held detector using the 0.5 μm chip

  30. Next Generation Application: Sensor Network Paradigm for Nuclear Proliferation Detection An Example 3-D Deployment of the Sensor Nodes as a Network: Cargo Container Inspection Processing Module Antenna Wireless Transmitter/ Receiver Sensing Module : Sensing diode Proposed Sensor Node • Objectives of Proposed Research: • The design, fabrication, and test of sensor node components: Sensing Module, Processing Module, Wireless Transmitter/Receiver • The design, fabrication, and test of a base station transmitter/receiver and the associated wireless sensor network protocol • Outcomes and Deliverables: • A neutron detection sensor network with low-power sensor nodes for nuclear proliferation detection • Physical dimensions of a single sensor node are similar to those of a business card for easy deployment • 3-D sensor node configurations that allow for neutron detection with directionality • Detection of fast neutrons (in addition to thermalized ones) by creating multiple wireless detection layers separated with moderators (such as paraffin) to slow down and capture certain fast neutrons (neutron spectroscopy application).

More Related