1 / 8

Silent Hero

Silent Hero. Ethan B. William K. Joshua A. Austin M. Purpose. The purpose of our experiment was to compare results of solar reception from ground level to at a higher altitude.

janina
Download Presentation

Silent Hero

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Silent Hero Ethan B. William K. Joshua A. Austin M.

  2. Purpose • The purpose of our experiment was to compare results of solar reception from ground level to at a higher altitude. • We included sensors to monitor barometric pressure and air temperature to see if the results of those various sensors would differentiate the solar reception.

  3. Background • Based on our internet searches, we found that one square meter of a solar panel receives around 100 to 200 watts of solar electricity. • We have also based our study on a cause that has been reused in many past projects conducted for science, yet we as a team still have high hopes that we will forge useful data to the world of science.

  4. Hypothesis and Test • We expected to record a somewhat different change in solar reception considering our proposition that the expanded space between the various make-up of air molecules (as in the higher atmosphere) would allow the sun rays to travel more efficiently though the atmosphere, producing a stronger amount of energy. • We tested this by sending our gondola up equipped with an arrangement of small solar panels connected to a Labpro. • We also sent up an air thermometer and barometer to see if these two variables had any effect on the solar reception.

  5. Results • In our experiment, we had nearly no results. • As our results came, we realized that the barometric pressure, air temperature, and solar energy did not change. • As we recorded our data we discovered that as the time went on the data from our sensors did not change. • The barometric pressure stayed around 100-101 Pascal range, air temperature stayed around 25-26 degrees Celsius, and the solar energy stayed around 4-5 volts.

  6. Analysis • The data we collected in the experiment shows that virtually no change in solar reception occurred. • This was entirely against our hypothesis, and basically did nothing for the benefit of anyone. • Perhaps we were too close to the ground, or the lack of sunshine served as a blockade to getting the results we expected. • But the bottom line is that we did not accomplish the theoretical expectations we had for our experiment.

  7. Conclusion • As of conclusion, we discovered that when doing an experiment you should make sure you have the proper conditions required for you experiment. • Also, keep track of all needed items, have good time management, and that you run your experiment enough to get the required repetitive results. • In our experiment, the weather qualities where not good conditions for an experiment requiring the sun like ours did. • If we could run our experiment again, we would go higher and on a day with clear skies.

  8. This is our Data Graph! 

More Related