1 / 88

an example routing illustration

using tracert or traceroute xtraceroute is a graphical version of tracert. an example routing illustration. layer 1: the physical layer. node: router or host host: general purpose computer router: general purpose or custom hardware physical layer connection through network adaptor

janna-pierce
Download Presentation

an example routing illustration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. using tracert or traceroute xtraceroute is a graphical version of tracert an example routing illustration

  2. layer 1: the physical layer • node: router or host • host: general purpose computer • router: general purpose or custom hardware • physical layer connection through network adaptor • network adaptor: NIC (network interface card)

  3. topic 1: transmission media • guided (see next slide) • unguided • laser, radio satellites

  4. guided physical media • magnetic media (e.g. tapes & disks) • twisted pair (e.g. UTP Cat 3, UTP Cat 5) • UTP = Unshielded Twisted Pair; Cat = Category • (Cat 5 has more twists per cm than Cat 3) • coaxial cable (e.g. cable TV) • thick • thin • optical fiber (e.g. submarine and backbone links) • single mode • multi mode • wireless (RF, microwave, infrared)

  5. coaxial cable (“coax”)

  6. principles of fiber optics (a) light rays from inside a silica fiber impinging on the air/silica boundary at different angles (b) light trapped by total internal reflection

  7. fiber optic cables (a) side view of a single fiber (b) end view of a sheath with three fibers

  8. 1. single-mode fiber (SMF): core ~8--12mic 2. multi-mode fiber (MMF): core ~50mic two types of fiber optic cables

  9. intermission

  10. wired media capacities cable typical b/w distances category 5 twisted pair 10 - 100 Mbps 100 m thin-net coax 10 - 100 Mbps 200 m thick-net coax 10 - 100 Mbps 500 m multimode fiber 100 Mbps 2 km single-mode fiber 100 - 10000 Mbps 40 km

  11. common carrier bandwidths service bandwidth DS1 1.544 Mbps DS3 44.736 Mbps STS-1 51.840 Mbps STS-3 155.250 Mbps STS-12 622.080 Mbps STS-48 2.488320 Gbps STS-192 9.953280 Gbps

  12. nature of signal in medium (air/glass/Cu):- electromagnetic (EM) waves speed of EM wave depends on medium example: speed of light in vacuum: 3 x 108 meters/sec speed of electrical signals in copper: 2/3 x speed of light in vacuum signal characteristics & data rates

  13.  = c' / f where,  = wavelength of signal c' = speed of light (EM wave) in given medium f = frequency of signal frequency – wavelength relationship

  14. the electromagnetic spectrum

  15. q1: what are common problems in signal propagation? ans: 1. signal attenuation - and, different frequencies are attenuated differently! 2. delay distortion - Fourier components travel at different speeds! 3. noise - thermal noise - impulse noise - crosstalk data transmission

  16. q2: how do you transmit information (bits)? ans: by modulation - superimpose electrical signal (corresponding to bits) onto a carrier wave; then, transmit in the medium - modulation can be of several types (see next slide) data transmission

  17. “the sampling theorem” Harry Nyquist, Claude Shannon, et alia “exact reconstruction of a continuous-time baseband signal from its samples is possible if the signal is bandlimited and the sampling frequency is greater than twice the signal bandwidth maximum data rate of a finite bandwidth noiseless channel information theory

  18. DC signaling (i.e., baseband signaling): bits encoded & transmitted as square waves (see next slide) suitable for short links, low speeds AC signaling (by modulation of a carrier wave) bits first encoded as square waves (see next slide); then, use these waves to modulate carrier; finally, transmit modulated carrier suitable for long-haul links, higher speeds data transmission: signaling

  19. modems: electrical representation of data bits (a) a binary signal (b) amplitude modulation (c) frequency modulation (d) phase modulation

  20. assertion: we could use a 2 signal-level system to represent data i.e., logic 0 = +5v and logic 1 = 0v any foreseeable problems? yes 1. is 0v = logic 0, or is it an idle transmitter? 2. DC bias on line therefore, we need better encoding strategies data transmission: bit encoding

  21. four types of encoding schemes: NRZ (Non-Return to Zero) NRZI (Non-Return to Zero Inverted) Manchester 4B/5B (used in conjunction with NRZI) data transmission: bit encoding

  22. bit encoding (cont'd.): fig 2.10 (textbook) required clock rates?

  23. bit encoding problems with NRZ? 1. “baseline wander” - shift in average (source or perceived) signal strength 2. clock recovery problem - sender-to-receiver synchronization is lost (see next slide) instead, why not send clock signal over separate wire?

  24. the clock sync problem(when clock cannot be recovered)

  25. how to extract bits from received signal • separate clock cable too expensive • so, how to recover clock from data signal? • clock recovery depends on lots of transitions • “string of ones” sync problem (NRZI) • “string of zeros” sync problem (Manchester)

  26. bit encoding using 4B/5B:table 2.4 (textbook) 4-Bit Data Symbol 5-Bit Code 0000 11110 0001 01001 0010 10100 0011 10101 0100 01010 0101 01011 0110 01110 0111 01111 1000 10010 1001 10011 1010 10110 1011 10111 1100 11010 1101 11011 1110 11100 1111 11101 how to encode in 4B/5B ... 1. first encode data into 5-bit code using table shown to right. (5-bit code ensures that no more than 1 leading zero & no more than 2 trailing zeros) 2. then, encode 5-Bit code using NRZI

  27. points to ponder ... • does 4B/5B solve clock-sync problem? • - long string of zeros? • - long string of ones? • what is baud rate? is it the same as bit rate? • baud rate of NRZI? • baud rate for Manchester encoding? • baud rate for 4B/5B? • efficiency of encoding for above schemes? • which encoding scheme is most efficient? • which one is least efficient?

  28. the material in the following slides is not in your textbook, but has been included here for your study addendum to topic 1:some additional material on the physical layer

  29. radio transmission (a) radio waves in the VLF, LF, and MF bands follow curvature of earth (b) in the HF band, they bounce off the ionosphere

  30. communication satellites geostationary satellites medium-earth orbit satellites low-earth orbit satellites satellites versus fiber

  31. communication satellites communication satellites and some of their properties

  32. communication satellite basics • launched by rockets • satellites must maintain orbit stationarity • satellites follow Kepler's laws of planetary motion • ability to correct orbital drift • old age of satellite: orbital decay and death

  33. low-earth orbit satellites -- Iridium (a) the Iridium satellites form six necklaces around the earth (b) 1628 moving cells cover the earth

  34. Globalstar (a) relaying in space (b) relaying on the ground

  35. “unguided” laser transmission convection currents can interfere with laser communication systems

  36. intermission

  37. public switched telephone system • structure of the telephone system • “POTS” • the politics of telephones • “PSTN”, “telco”, “telecom”, “Baby Bells” • governments own, operate, and/or regulate • the local loop: modems, ADSL and wireless • “last mile”, “first mile” • trunks and multiplexing • switching

  38. structure of the telephone system (a) fully-interconnected network “complete graph”, “clique”, “mesh” (context sensitive) (b) centralized switch (c) two-level hierarchy squares: “mesh” (context sensitive)

  39. major components of the PSTN • local loops • analog twisted pairs going to houses and businesses • trunks • digital fiber optics connecting the switching offices • switching offices • where calls are moved from one trunk to another

  40. the local loop: modems, ADSL, and wireless

  41. wireless local loops Architecture of an LMDS system.

  42. DSL: Digital Subscriber Line local loop Bandwidth versus distance over category 3 UTP for DSL.

  43. the politics of telephones LATAs, LECs, and IXCs Circles are LEC switching offices. Each hexagon belongs to the IXC whose number is on it.

  44. FDM: Frequency Division Multiplexing (a) original bandwidths (b) bandwidths raised in frequency (b) multiplexed channel

  45. WDM: Wavelength Division Multiplexing Wavelength division multiplexing. DWDM, CWDM, ...

  46. TDM: Time Division Multiplexing T1 framing

  47. sampling for transmission over TDM Delta modulation. delta modulation

  48. TDM of multiple data (voice) streams Multiplexing T1 streams into higher carriers. U.S. system: Synchronous Optical NETwork (SONET)

  49. TDM framing Two back-to-back SONET frames. two SONET frames in sequence

  50. standard TDM line rates SONET and SDH multiplex rates.

More Related