1 / 32

Kornati Islands, Croatia

Risk management in medical laboratories Ana Stavljenic-Rukavina Zagreb, Croatia. Kornati Islands, Croatia. The annual rate of illness and injury reported for hospital workers is 10% - about the same as for sheet metal workers, auto mechanics and paper mill workers (Am J of Nursing, 1992).

Download Presentation

Kornati Islands, Croatia

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Risk management in medical laboratories Ana Stavljenic-Rukavina Zagreb, Croatia Kornati Islands, Croatia

  2. The annual rate of illness and injury reported for hospital workers is 10% - about the same as for sheet metal workers, auto mechanics and paper mill workers(Am J of Nursing, 1992)

  3. The most frequent occupation-related illnesses among hcpersonel • respiratory problems • infections • dermatitis • drug or medication reactions

  4. Reasons for the lack of emphasis on employer’s health: • common notion that health professionals are capable of maintaining their health without assistance • availability of informal consultation with hospital physician • hospitals are oriented toward treating disease rather than maintaining health

  5. Accidents do not happen, they are caused • Safety should be taught and implemented on every level in the health care sector • Within health care environment, both workers and patients are daily confronted with various health and safety hazards • Therefore, implementation of general safety and risk reduction system is mandatory

  6. dusts physical agents chemical agents mutagenic and teratogenic agents skin irritants stress (!) hepatitis AIDS LABORATORY HAZARDSNon-infectious Infectious

  7. Material Safety Data Sheets (MSDS) • It is obligatory that the vendors supply MSDS for the chemicals • Vendor should make sure that the facility receives the MSDS before or along the shipment of chemical product • MSDS must be available for each chemical used in an operation • Emergency and first aid procedures and handling precautions should be given in writen form to professionals

  8. Infectious occupational health hazards • Hepatitis B: a model for transmission of blood-borne patogens (10-40% of health care workers have serologic evidence of past or present infection) • Infection risk after needle puncture: • HBV: 5-40% • HCV: 1-10% • HIV: <0.5%

  9. An individual is at risk for HBV or HIV infection in proportion to the extent at which he/she is exposed to blood and body fluids

  10. Therefore, effective protection against blood-borne diseases requires universal observation of common barrier precautions

  11. ....which simply means: within healthcare environment, all body fluids and tissues should be treated as infectious. Equally important: waste disposal!

  12. COMPONENTS OF MEDICAL SAFETY • Employee safety • Patient safety • Environment safety

  13. ELEMENTS OF EMPLOYEE SAFETY • Blood and body fluid exposures • Allergies • Communicable disease exposures • Musculoskeletal injuries • Immunization program • Systematic review, follow-up, and reporting of employee incidents

  14. Levels of Biosafety • BSL 1: Material not known to consistently cause disease in healthy adults. • BSL 2: Associated with human disease. Hazard is from percutaneous injury, ingestion, or mucous membrane exposure. • BSL 3: Indigenous or exotic agents with potential for aerosol transmission; disease may have serious or lethal consequences. • BSL 4: Dangerous/exotic agents which pose a high risk of life-threatening disease, aerosol-transmitted lab infections or related agents with unknown risk of transmission.

  15. Risk Assessment • Pathogenicity of material – disease incidence and severity • Routes of Transmission – parenteral, airborne or ingestion • Agent Stability – ease of decontamination • Infectious Dose – LD50 • Concentration – infectious organisms/vol. & working volume • Origin of material - Wild Type, primary cells • Availability of effective prophylaxis – Hep. B vaccine • Medical surveillance – exposure management • Skill level of staff

  16. Risk Assessment • Risk of Activity – same agent can have different containment levels at different stages of protocol: • Procedures that produce aerosols have higher risk • Procedures using needles or other sharps have higher risk • Handling blood, serum or tissue samples may have lower risk • Purified cultures or cell concentrates may have higher risk • Larger volumes (10 L) have higher risk

  17. Primary Containment • Lab practices – SOP regulating access, biohazard warning sign, sharps/needle precautions, SOPs for decontamination and waste. • Safety equipment – biosafety cabinets (BSC), sharps containers, sealed rotors. • Personal protective equipment (PPE) : coat, gloves, goggles. • Host-vector for rDNA

  18. Aerosol Precautions • Use BSC for all procedures that may generate aerosols. • Use centrifuges with biosafety covers. • Do not use a syringe for mixing infectious fluids. • Cultures, tissues, specimens of body fluids, etc., are placed in a container with a cover that prevents leakage during collection, handling, processing, storage, transport or shipping.

  19. Needle and Sharps Precautions • Precautions are for any contaminated sharp item, including needles and syringes, slides, pipettes, capillary tubes, and scalpels. • Plasticware should be substituted for glassware whenever possible.

  20. Needle and Sharps Precautions • Used disposable needles must not be bent, sheared, broken, recapped, removed from disposable syringes, or otherwise manipulated by hand before disposal. Dispose in puncture-resistant containers which must be located near work. • Non-disposable sharps must be placed in a hard-walled container for transport to a processing area for decontamination, preferably by autoclaving. • Broken glassware must not be handled directly by hand.Pick up by mechanical means such as a brush and dustpan, tongs, or forceps.

  21. Human Blood, Tissue and Fluid Occupational Exposure to Bloodborne Pathogens • Use BSL 2 work practices and procedures. • Additional requirements for HIV work. • Everyone needs to be offered the Hepatitis B vaccine. • Develop specific exposure plan SOPs. • Specific training is required. • Review needle/syringe use and replace with “safe” devices. • Exposure incidents must be followed up.

  22. Toxins • Use BSL 2 work practices and procedures. • Develop a Chemical Hygiene Plan specific to the toxin used. Include containment (hoods, biosafety cabinets). • Some toxins are “Select Agents” and require registration.

  23. Select Agents • Possession, use and transfer of specific biological agents requires registration. • “Restricted Persons” are not allowed to have access to these agents. • High security and containment must be maintained.

  24. Security • Control access to areas where biological agents or toxins are used and stored. • Keep biological agents and toxins in locked containers. • Know who is in the laboratory, what materials are being brought and what materials are being removed from the laboratory. • Have a protocol for reporting incidents. • Have an emergency plan.

  25. Emergencies Develop and practice plans for: • Spills: large spills, spills inside BSC • Accidental exposures: needlesticks, eye/mucous membrane splash, breathing aerosols • Power/Utility failures: BSC, freezers, ventilation, lights, water • Fires • Medical emergencies

  26. Waste Disposal “Red bag” or “Regulated Medical Waste”: • All mammalian cells or anything that came in contact with mammalian cells • All BSL 2 material or anything that came in contact with BSL 2 material • All needles/syringes regardless of use • No need to autoclave this waste prior to disposal in EH&S red bag/box (material is incinerated).

  27. CRITICAL ELEMENTSCREATING A SAFETY CULTURE • Demonstrate top leadership commitment to safety • Swift and visible correction of unsafe conditions • Established procedures for reporting unsafe conditions • Reward workers for following procedures • Involve frontline healthcare workers in identifying problems and solutions

  28. Role of management The scope: identifying problem areas and exerting specific actions to correct them

  29. Development of Safety Program • Recognition of hazards • Determination (evaluation) of hazards • Baseline health and safety survey • Sampling strategy • Health and safety plan

  30. Risk management RISK ASSESSMENT (GENERIC) | TAKE THE DESIGN INTENTION l CHANGE IT BY "GUIDE WORDS" l CREATE HYPOTHETICAL DEVIATIONS l CREATE IMAGES l STIMULATE IMAGINATIONS OF THE TEAM TO SEARCH DATA FOR REAL DEVIATIONS l EXAMINE CAUSES AND CONSEQUENCE HARMLESS HARMFUL IGNORE ELIMINATE OR CONTROL

  31. Regulations • OSHA Bloodborne Pathogens • http://www.osha.gov/SLTC/bloodbornepathogens/index.html • CDC Select Agents • http://www.cdc.gov/od/ohs/lrsat.htm • NIH Guidelines for Research Involving Recombinant DNA Molecules • http://www4.od.nih.gov/oba/rac/guidelines/guidelines.html • DOT/CDC Shipping • http://www.cdc.gov/od/ohs/biosfty/shipregs.htm • CDC Import Permits • http://www.cdc.gov/od/ohs/biosfty/imprtper.htm • USDA/APHIS Permits • http://www.aphis.usda.gov/vs/ncie/

  32. Resources • CDC Biosafety in Microbiological and Biomedical Laboratories http://www.cdc.gov/od/ohs/biosfty/bmbl4/bmbl4toc.htm • ABSA Risk Groups http://www.absa.org/riskgroups/index.htm • Canadian MSDSs http://www.hc-sc.gc.ca/pphb-dgspsp/msds-ftss/index.html • Environmental Health & Safety – Lab Safety http://www.ehs.sunysb.edu or 2-9672

More Related