1 / 17

BRX210 ‘Mechanical Blueprint Reading’

BRX210 ‘Mechanical Blueprint Reading’. Unit #5 Working Drawings. After studying this unit, you will be able to:. Interpret a one-view drawing Interpret a two-view drawing Interpret a simple three-view drawing. Answers to Rear Bracket Quiz. 2 7.0 mm Metric (mm) 114.0 mm M1033 4.8 mm

jermaine-huffman
Download Presentation

BRX210 ‘Mechanical Blueprint Reading’

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BRX210 ‘Mechanical Blueprint Reading’ Unit #5 Working Drawings

  2. After studying this unit, you will be able to: • Interpret a one-view drawing • Interpret a two-view drawing • Interpret a simple three-view drawing

  3. Answers to Rear Bracket Quiz • 2 • 7.0 mm • Metric (mm) • 114.0 mm • M1033 • 4.8 mm • 7.8 mm • 96.2 mm was 56.0 mm • 96.2 mm • Long • ± 0.25 mm • 40.0 mm • 114.8 mm • 5 R added • diameter

  4. Answers to Gasket Quiz • 0.034 in. • 1.94 in. • 1.75 in. • 0.385 in • R 0.44, R 0.66, R 0.78 • R.L. • Must be uniform within given limits • 0.88 in. • 6510-199, 6510-232 • ±0.0005 in. • Full Pump to Cylinder Block • Full • 0.88 in. • 0.022 – 0.016 in. • AN-894

  5. Answers to Blade Clamp Quiz • 0.312/0.304 x 0.275/0.267 • 9/16 in. • 19/32 in. • ± 0.010 • Ø 0.142/0.138 cast hole • 0.154 in. • 0.142 in. • 0.189/0.198 • 4:1 • Investment Casting • 0.317 in. • 0.035/0.042 • 8620 Steel • Hidden • 0.038/0.052 • No • 0.304/0.312 • Yes • 0.5725 in. • Rectangular

  6. Answers to Threaded Shaft-Pulley Puller Quiz • ± 0.015 in • 0.06 in. • NTS (Not to Scale) • 3.495 in. • 0.03 in. • 0.063 in. • 0.750 in • 0.550 in. • 0.13 in. • 2.057 in. • 0.330 in. • 0.586 in. • 8-23 • 8-14 • Statistical Process Control • 3 • ± 0.060 in. • 2.250 in. • The entire part • Rev E

More Related