130 likes | 150 Views
Comprehensive overview of TPC signal cable plan, DAQ setup, and data flow management by Jin Huang at BNL, including fiber specifications and radiation considerations.
E N D
TPC Signal cable plan Jin Huang (BNL)
TPC DAQ nomenclature Input data stream: 600-1100 bidirectional fibers links Max continuous: 6.5 Gbps / fiber Output data stream to buffer box: 24 x 25+ Gbps Ethernet via fiberAfter triggering and compression • Clock/Trigger input: • Optical links • Clock = 9.4 MHz TPC DAM L3 Scope, 1.2.6 • 150k chan • 600 FEEs • 24 sectors • Continuousreadout Transfer to SDCC continuously Structure/ GEM L3 ScopesWBS 1.2.1-4 FEE L3 Scope1.2.5 DAQ L2 ScopeWBS 1.6 Buffer box Jin Huang <jhuang@bnl.gov>
Cabling plan 24 sectors total, 12 Sector each side. For each sector: 1x FELIX-EBDC, 2x 48F MTP trunk cables from DAQ room to TPC MTP<->LC break up in TPC endcap. 40 bi-directional LC <-> 26 FEEs MTP cable x(48+12): Outer diameter = 6-9 mm; Weight = 22-79 kg/km; Max install tension = 600-800 N; Minimal bend radius = 9-27 cm; Operating temperature: 0-70C. Jin Huang <jhuang@bnl.gov>
Parts 48F MTP(M) - LC Hydra assembly 900um OM3 18" length FELIX v2 2x 48 Fiber MTP (M) FEE Tranceiver 48-fiber MTP (F)-MTP (M) on OM3 cable, Polarity straight, 58m 1U 19" 12 port MPO feedthru panel with 12X MPO couplers. Jin Huang <jhuang@bnl.gov>
Bill of material Jin Huang <jhuang@bnl.gov>
Extra Information Jin Huang <jhuang@bnl.gov>
TPC Data flow Overview Jin Huang <jhuang@bnl.gov>
Radiation load Jin Huang <jhuang@bnl.gov>
Next, apply to full sPHENIX detector Jin Huang <jhuang@bnl.gov>
Radiation dose Jin Huang <jhuang@bnl.gov>
Fluence Jin Huang <jhuang@bnl.gov>
More quantitatively … Jin Huang <jhuang@bnl.gov> Averaged in |z|<100 cm Plot against R Dose peaked at 10kRad MeV-Neutron ~ 1010 n/cm2 for inner detectors
More quantitatively … Jin Huang <jhuang@bnl.gov> Averaged in R~5 cm Plot against z Dose peaked at 10kRad MeV-Neutron ~ 1010 - 1011 n/cm2 for inner detectors