1 / 34

LHC Accelerator Upgrade: Phases I and II

This talk outlines the goals and plans for the LHC accelerator upgrade, including the consolidation in phase I and the luminosity upgrade in phase II. It explores how to further increase the luminosity, including increasing the beam current and focusing more. The talk also discusses the technological challenges and the energy upgrade.

jmarx
Download Presentation

LHC Accelerator Upgrade: Phases I and II

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LHC Accelerator Upgrade J.-P. Koutchouk CERN/AT Talk to IoP/JPK

  2. Outline • Introduction • Goals (phases I and II, energy upgrade) • Phase I: the consolidation • Phase II: the luminosity upgrade • How to increase further the luminosity? • Increasing the beam current • Focusing more • Luminosity issues • Technological challenges • The energy upgrade • Conclusions Talk to IoP/JPK

  3. 1- Introduction The present focus of the accelerator sector is obviously the baseline LHC. Planning the upgrade is nevertheless timely as it is largely technology-drivenwith lead times of 5 to 15 years, depending on goals and complexity. Yet, several choices require LHC results (machine and physics) Hence upgrade studies aim primarily at identifying the necessary hardware to launch in time the R&D programmes and give clear goals to the action of CERN partners (US-LHC, CARE-HHH and NED) Talk to IoP/JPK

  4. 2a- The goals Talk to IoP/JPK

  5. 2b- The goals: the luminosity profile • LHC baseline • SLHC • LHC+ &SLHC Talk to IoP/JPK

  6. 3a- Phase I (LHC+) • Motivations: • Facilitate reaching the ultimate luminosity of 2.31034cm-2s-1(made difficult following increase of crossing angle, introduction of a beam screen and collimator impedance) • Improve the running efficiency at nominal performance& create margins if some of the design parameters would not be reached. • Boundary conditions: • no interference with detectors, • fastest implementation: Nb-Ti s.c. technology; • fast performance increase: no new beam dynamics Talk to IoP/JPK

  7. 3b- Phase I (LHC+) • Solution:change the IR1 & IR5 triplets(70mm)for larger aperture ones (130mm).This gives the potential to recover the “ultimate” luminosity with a safety margin of ~50%.D1 may have to be changed. The superconducting cable is available (spare LHC dipole cable). • Status: • Feasibility studies done • Included in Proposal SLHC-PP to FP7-Infrastr.-2007-1 coord. L. Evans, issued in May 2007. • Project coordinator appointed (R. Ostojic) to evaluate cost and manpower requirements. • Timescale: operational in 2012 • Budget: remains to be found Talk to IoP/JPK

  8. 4a- Phase II (SLHC) • Challenge: LHC baseline was pushed to “maximum” in the competition with SSC. Going beyond requires creative solutions. • Luminosity goal: ~ 101034cm-2s-1 • Boundary conditions:For such a significant upgrade, the added complexity should be minimized fora fast progress of performanceand the risks mitigated for a graceful degradation in case of unexpected. Talk to IoP/JPK

  9. 4b- P.II: The luminosity formula crossing angle standard Variation of βalong bunch F decreases with decreasing b*, increasing kb, Nb and ss. H is in the range {0.9, 1} for practical b*. A constraint is the “beam-beam limit”, usually given by: Talk to IoP/JPK

  10. 4c- P.II: The strategies Luminosity at the beam-beam limit: • Two main tracks: • Luminosity increaseby increasing the beam current • Luminosity increaseby lowering b* • + work on form factors and beam-beam limit Talk to IoP/JPK

  11. 4d- P.II: Increase of beam current • Strategy: • Increase significantly the bunch charge Nb (*4). • Respect the beam-beam limit (that would be exceeded) by a change of regime: lengthen the bunch to reach a quasi coasting beam regime by longitudinal emittance blow-up. • Reduce the number of bunches (50 ns spacing)to control e-cloud and image current heat deposition & beam stability. • Recover the lost factor of 2 by reducing beta* by a factor of 2 (25 cm) • Reduce the crossing angle by wire compensation Talk to IoP/JPK

  12. 4e- P.II: Increase of beam current Merits:no elements in detectors; quasi nominal insertion beam opticswith small chromatic aberrations;higher average luminosity per run. Challenges:new beam dynamics:novel beam-beam regime not experienced at this level of performance; higher peak beam current coupling to machine elements, sophisticated rectangular beam distribution; machine protection: higher bunch/beam power; higher collimator robustness required; radiation protection: protection to be re-assessment when exceeding the ultimate beam current in the LHC (INB). injectors: new beam preparation; injectors’ upgrade for full operational performance: Linac4, PS2, SPS improvement. Talk to IoP/JPK

  13. 4f- P.II: Increase of beam current • Investments: new triplet (b*=25 cm) & D1, install the 200 MHz RF system, possibly more resistant collimators, upgrade of dumping system, extend the dynamic range of some beam instruments,upgrade radiation protection,upgrade of injectors (SPS, PS, Booster and Linac). • What if: - if beam current cannot be reached or if new beam-beam regime inefficient or if injectors not ready, return to 25 ns spacing to recover the Phase I performance (nominal  1 to 2) • Could then gain +30% luminosity with additional crab crossing. • Recover Phase II performance if new triplet is b*=10cm type AND if larger angle crab crossing would be successful. Talk to IoP/JPK

  14. (Sep1= 3) (Sep1= 5) 4g- P.II: Decrease of beta* To improve significantly the luminosity by ab* reduction,a modification of the crossing scheme or parameters is mandatory (Sep1= 3) PAC07 Talk to IoP/JPK

  15. D0 D0 D0 D0 4h- P.II: Early separation Full Early Separation (50 ns only if D0 not in inner detector) First encounter First encounter Partial Early Separation (25 or 50 ns) We need a residual crossing angle Talk to IoP/JPK

  16. 4i- P.II:Detector geometrical constraints We cannot put the D0 in the inner detector. There are potential slots starting at 3.5 m and 6.8 m (ATLAS). A “partial” early separation should be considered Courtesy of M. Nessi, ‘Machine upgrade, ATLAS considerations’, June 2006 Talk to IoP/JPK

  17. 4j- P.II: Decrease of beta* Merits: modification of LHC only in IR’s with no consequence for the global machine; no beam current increase beyond the agreed LHC & INB programs (collimation, machine and radiation protection);same beam dynamics mode and operations strategy;easy luminosity leveling,expectedfaster build-up of performance related to a lower complexity; compatible with 25 and 50 ns spacing (with reduced performance by 2),mild upgrade of injectors but benefits from an injector upgrade program. Challenges: installation of dipoles deep inside the detectors, higher chromatic aberrations, a few encounters at a reduced beam separation,lower integrated luminosity per run. Talk to IoP/JPK

  18. 4k- P.II: Decrease of beta* • Investments: {new triplet (b*= 10 cm), D1}, D2, one matching quad?, 4 early sep. dipoles, optional crab cavities and electron lenses, improvements in injectors. • What if: - if reduced separation not acceptable: full recovery possible but using new untested solutions: i) e-lens compensation or ii) increase separation and use crab or iii) turn to 50 ns operation with a loss by  2, that could be compensated by some current and bunch length increase (other strategy). • if chromatic aberrations too large: fast decrease with increase of beta*, reduction of l*, Q0, or achromatic collimation insertions? • If conceptual problem, turn to intensity increase with same hardware in IR’s. Talk to IoP/JPK

  19. two draft upgrade scenarios (courtesy F. Zimmermann, Valencia 2006) compromises between heat load and # pile up events Talk to IoP/JPK

  20. IP1& 5 luminosity evolution for 25-ns and 50-ns spacing F. Zimmermann 25 ns spacing 50 ns spacing average luminosity initial luminosity peak may not be useful for physics (set up & tuning?) Talk to IoP/JPK

  21. 4n-P.II: Luminosity leveling • The relatively fast luminosity decay and high multiplicity call for Luminosity Leveling. • …but the issue is how to do it efficiently: • dynamic beta*:uses existing hardware;probablycomplex due tolarge number of side-effects in IR’s AND arcs. • dynamic bunch length:needs new RF; possible side effects in whole machine related to modification of peak current. • dynamic crossing angle:using the early separation hardware, no side effects identified. Even better: use crab. • EXCEPT, valid for all, a modulation of the length of the luminous region. Talk to IoP/JPK

  22. 4p-P.II: Luminosity leveling Multiplicity around 50 G. Sterbini Talk to IoP/JPK

  23. 4p-P.II: Learning period Performance rise depends on complexity. Statistical law by V. Shiltsev. Using/extending his approach yields: complexity luminosity The strategy with beam current increase requires about 3 years after Phase I (4 years without). In the ISR, a comparable beta* decrease (/7) took a few weeks at reduced current; one year for the LHC at full current? Talk to IoP/JPK

  24. 4q- P.II: LHC technological challenges • Triplets: the key issue (challenge, lead time, cost) The most promising technology is Nb3Sn for larger field (50%) and larger temperature margin. A very recent success for this delicate technology: US-LARP TQS02a reached ~ 11T peak. The aperture barrier of 90 to 110 mm is being jumped (stress limit) and the required length (~9 m) should not cause an additional problem. • Fall-back solution: very large and long low gradient Nb-Ti triplet for larger temperature margin & ability to collect the collision debris on masks; presently considered for b*≥25 cm but might be pushed further (?) • Energy deposition: being included in magnet design Talk to IoP/JPK

  25. 4r- P.II: LHC technological challenges • Early separation dipoles:feasibility study done (e-m and power deposition). It appears so far technically doable. Before further studies, an assessment of its impact on the detection of particles is needed for ATLAS (organized) and CMS (to be organized). • Wire compensation: promising results in SPS; implemented in RHIC by US-LARP and under study. • Crab crossing:under test at KEK (electrons); being considered for US-LARP R&D: accuracy challenging. • Electron lenses:implemented at Tevatron; considered for installation in RHIC and support by US-LARP: very challenging for full beam-beam compensation. Talk to IoP/JPK

  26. 5-The energy upgrade The progress of super-conducting magnet technologies opens the possibility to consider doubling the LHC energy with Nb3Sn (25 TeV c.m.) or perhaps tripling it with emerging technologies based on HTS superconductors. This would be a major upgrade of the CERN accelerator complex that requires feasibility studies yet to be done. The first and critical element is the availability of collider quality high-field superconducting magnets that can stand or are shielded from the emitted synchrotron radiation. The phase II studies do not include the energy upgrade but should be used to prepare and e.g. foster external contributions if the physics motivation is expressed/confirmed. Talk to IoP/JPK

  27. Talk to IoP/JPK

  28. Conclusion The upgrade of the LHC luminosity is a natural and necessary development for such a unique facility; it is very challenging. A two-phase strategy minimizes the increments in complexity. Two roads are considered to reach the second phase with ~10 in peak luminosity. They are both promising with different challenges and risks. One should aim, if possible, at combining both for a robust solution. A tight collaboration with the experimentalists and sharing of risks is needed, e.g. for an early separation scheme, for the luminosity leveling options,… The technology needed requires the R&D program proposed in the White Paper and the joint effort of the community: US-LARP, CARE and, of course, the Experimenters… Talk to IoP/JPK

  29. Annexes • Variation of the luminous region with dynamic c • Expression of the F factor • Nominal LHC parameters • Minimum crossing angle Talk to IoP/JPK

  30. Variation of the luminous region with dynamic c Sterbini Talk to IoP/JPK

  31. luminosity reduction factor from crossing angle Piwinski angle nominalLHC Zimmermann Talk to IoP/JPK

  32. Talk to IoP/JPK

  33. Talk to IoP/JPK

  34. Ruggiero Talk to IoP/JPK

More Related