1 / 113

TBM850 G1000 Config Mode Screens Guide

This guide helps Service Centers determine if unauthorized changes have been made in G1000 Configuration screens for the TBM850. If unauthorized changes are detected, contact Garmin Product Support for assistance in resetting the G1000 system.

joewells
Download Presentation

TBM850 G1000 Config Mode Screens Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Socata TBM850 G1000 Config Mode Screens • This guide will allow a Service Center to determine if unauthorized changes have been made in G1000 Configuration screens for the TBM850. If the G1000 system software version is 0719.01, and the screens do not match these shown, unauthorized changes may have been made. Contact Garmin Product Support for assistance if needed to reset the G1000 system. • This presentation is for reference only and does not replace any approved G1000 Service Literature instructions.

  2. System Group Pages No changes can be made to this page.

  3. System Group Pages No changes can be made to this page.

  4. System Group Pages Changes can be made. Reload PFD 1 Config file to reset.

  5. System Group Pages Changes can be made. Reload MFD 1 Config file to reset.

  6. System Group Pages Changes can be made. Reload PFD 2 Config file to reset.

  7. System Group Pages Changes can be made. Reload GCU Config file and then “Update CFG” to reload Master Config Moduleto reset.

  8. System Group Pages Changes can be made. Reload GMC Config file and then “Update CFG” to reload Master Config Moduleto reset.

  9. System Group Pages Audio Test box changes are not saved. Changes can be made in the Altitude Alerter box. Reload AIRFRAME config file to reset.

  10. System Group Pages Optional equipment (ADF, DME, ChartView, TAWS, etc.) can be disabled by reloading certain config files. Reload per G1000 LMM to correct.

  11. System Group Pages GIA and GFC Servo Fault logs can be deleted. Old Data can not be recovered after deletion.

  12. System Group Pages No changes can be made to this page.

  13. System Group Pages No changes can be made to this page.

  14. System Group Pages GDL69 & GWX can be turned on/off here. Reload SYSTEM config file to reset.

  15. System Group Pages No changes can be made to this page.

  16. System Group Pages No changes can be made to this page.

  17. System Group Pages No changes can be made to this page.

  18. System Group Pages No changes can be made to this page.

  19. System Group Pages No changes can be made to this page.

  20. System Group Pages Changes can be made. Clear User Settings to reset.

  21. System Group Pages No changes can be made to this page.

  22. GDU Group Pages Changes can be made. Reload MFD 1 Config file to reset.

  23. GDU Group Pages Changes can be made. Reload PFD 1 Config file to reset.

  24. GDU Group Pages Changes can be made. Reload PFD 2 Config file to reset.

  25. GDU Group Pages Changes can be made. Reload PFD 1, PFD 2 & MFD 1 Config files to reset.

  26. GDU Group Pages Changes will not be saved in this page.

  27. GDU Group Pages No changes can be made to this page.

  28. GDU Group Pages No changes can be made to this page.

  29. GDU Group Pages Changes will not be saved in this page.

  30. GDU Group Pages Changes will not be saved in this page.

  31. GDU Group Pages Changes will not be saved in this page.

  32. GDU Group Pages Changes will not be saved in this page.

  33. GDU Group Pages Changes will not be saved in this page.

  34. GDU Group Pages Changes will not be saved in this page.

  35. GDU Group Pages Changes will not be saved in this page.

  36. GDU Group Pages No changes can be made to this page.

  37. GIA Group Pages Changes can be made. Reload the following config files: GIA 1, Selected Alt option, KTA810 (if equipped) and then “Update CFG” to reload Master Config Module. “CLR NV” softkey use will require GIA, Audio and GFC Cert Config files to be reloaded.

  38. GIA Group Pages Changes can be made. Reload the following config files: GIA 2, Selected Alt option, and if equipped the WX500, KTA810, KRA405, KN63 and ADF; then “Update CFG” to reload Master Config Module. “CLR NV” softkey use will require GIA, Audio and GFC Cert Config files to be reloaded.

  39. GIA Group Pages Changes can be made. Reload the following config files: GIA 1, Selected Alt option, KTA810 (if equipped) and then “Update CFG” to reload Master Config Module.

  40. GIA Group Pages Changes can be made. Reload the following config files: GIA 2, Selected Alt option, and if equipped the WX500, KTA810, KRA405, KN63 and ADF; then “Update CFG” to reload Master Config Module.

  41. GIA Group Pages Changes can be made. Reload the following config files: GIA 1, Selected Alt option, KTA810 (if equipped) and then “Update CFG” to reload Master Config Module.

  42. GIA Group Pages Changes can be made. Reload the following config files: GIA 1, Selected Alt option, KTA810 (if equipped) and then “Update CFG” to reload Master Config Module.

  43. GIA Group Pages Changes can be made. Reload the following config files: GIA 2, Selected Alt option, and if equipped the WX500, KTA810, KRA405, KN63 and ADF; then “Update CFG” to reload Master Config Module.

  44. GIA Group Pages Changes can be made. Reload the following config files: GIA 2, Selected Alt option, and if equipped the WX500, KTA810, KRA405, KN63 and ADF; then “Update CFG” to reload Master Config Module.

  45. GIA Group Pages Changes can be made. Reload the following config files: GIA 1, Selected Alt option, KTA810 (if equipped) and then “Update CFG” to reload Master Config Module.

  46. GIA Group Pages Changes can be made. Reload the following config files: GIA 1, Selected Alt option, KTA810 (if equipped) and then “Update CFG” to reload Master Config Module.

  47. GIA Group Pages Changes can be made. Reload the following config files: GIA 2, Selected Alt option, and if equipped the WX500, KTA810, KRA405, KN63 and ADF; then “Update CFG” to reload Master Config Module.

  48. GIA Group Pages Changes can be made. Reload the following config files: GIA 2, Selected Alt option, and if equipped the WX500, KTA810, KRA405, KN63 and ADF; then “Update CFG” to reload Master Config Module.

  49. GIA Group Pages Changes can be made. Reload the following config files: GIA 1, Selected Alt option, KTA810 (if equipped) and then “Update CFG” to reload Master Config Module.

  50. GIA Group Pages Changes can be made. Reload the following config files: GIA 2, Selected Alt option, and if equipped the WX500, KTA810, KRA405, KN63 and ADF; then “Update CFG” to reload Master Config Module.

More Related