1 / 32

Configuring and Testing Your Network

Configuring and Testing Your Network. Network Fundamentals – Chapter 11. Objectives. Define the role of the Internetwork Operating System (IOS) Use Cisco CLI commands to perform basic router and switch configuration and verification

jolene-williamson
Download Presentation

Configuring and Testing Your Network

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Configuring and Testing Your Network Network Fundamentals – Chapter 11

  2. Objectives • Define the role of the Internetwork Operating System (IOS) • Use Cisco CLI commands to perform basic router and switch configuration and verification • Given a network addressing scheme, select, apply, and verify appropriate addressing parameters to a host • Use common utilities to verify network connectivity between hosts • Use common utilities to establish a relative performance baseline for the network

  3. Role of Internetwork Operating System (IOS) The Cisco IOS provides devices with the following network services: • Basic routing and switching functions • Reliable and secure access to networked resources • Network scalability

  4. Define the purpose of startup config

  5. Identify the relationship between IOS and config

  6. Mode of Cisco IOS

  7. Conti…

  8. IOS commands

  9. Types of help in IOS

  10. Show Commands

  11. Prompts

  12. Physical Interfaces

  13. Name Devices

  14. Role of Passwords • To limit access to switches and routers

  15. Remote Management

  16. Adding Banner to devices

  17. Use Cisco CLI Commands to Perform Basic Router & Switch Configuration and Verification • Trace the steps used to examine the startup config, make changes to config, and replace the startup config with the running config

  18. Backup your configuration

  19. How to capture routers output • Use a text file to backup and restore config settings

  20. Interface configuration

  21. Conti…

  22. Conti…

  23. Select, Apply, and Verify Appropriate Addressing Parameters to a Host

  24. Select, Apply, and Verify Appropriate Addressing Parameters to a Host • Trace the steps for using ipconfig/ifconfig to verify host parameter assignments and for using ping to test assignments

  25. Use Common Utilities to Verify Network Connectivity Between Hosts • Use the ping command in the CLI to determine if the IP protocol is operational on a local host

  26. Use Common Utilities to Verify Network Connectivity Between Hosts • Use the ping command to determine if the IP protocol is properly bound to an NIC

  27. Use Common Utilities to Verify Network Connectivity Between Hosts • Use the ping command to determine if a host can actively communicate across the local network

  28. Use Common Utilities to Verify Network Connectivity Between Hosts • Use the ping command to verify that the local host can communicate across the internetwork to a given remote host.

  29. Use Common Utilities to Establish a Relative Performance Baseline for the Network

  30. Use Common Utilities to Establish a Relative Performance Baseline for the Network • Trace the steps for verifying the physical addresses of the hosts

  31. Summary

More Related