1 / 24

Safety & Management Solutions Ltd NEBOSH General Certificate In Occupational Health and Safety .

Safety & Management Solutions Ltd NEBOSH General Certificate In Occupational Health and Safety . NGC 2; Electrical Safety . Learning Outcomes. Identify the Hazards associated with working with electricity Identify control measure to reduce the risk from working with electricity .

joyce
Download Presentation

Safety & Management Solutions Ltd NEBOSH General Certificate In Occupational Health and Safety .

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Safety & Management Solutions Ltd NEBOSH General Certificate In Occupational Health and Safety . Safety & Management Solutions Ltd April 2012

  2. NGC 2; Electrical Safety Safety & Management Solutions Ltd April 2012

  3. Learning Outcomes • Identify the Hazards associated with working with electricity • Identify control measure to reduce the risk from working with electricity Safety & Management Solutions Ltd April 2012

  4. Basic Circuitry Current Resistance Voltage Safety & Management Solutions Ltd April 2012

  5. Electrics and atoms • Atoms contain • Nucleus • Electrons • Electricity is • Movement of electrons • Conductive materials

  6. Sources • Alternators (generators) • Chemical reaction (batteries) • Solar panels

  7. Hazards and controls • Primary • Direct – exposed live conductors • Indirect – equipment becomes live • Electric shock • Heart fibrillations • Death

  8. Hazards and controls • Secondary • Electric burns – heating effect, point of contact, deep • Microwaves – no contact • Arcing – UV radiation, molten metal, radiated heat • Fires – overheating of cables, current leakage, flammable materials close to electrical equipment, ignition by arcing • Explosions – of equipment, vapours, gasses, liquids and dust • Falls

  9. Hazards of Electricity • Electric Shock • Electrical Burns • Electrical Fires • Explosions • Secondary injury's Safety & Management Solutions Ltd April 2012

  10. Factors for severity • Current • Voltage • Frequency • Duration • Resistance • Current path Safety & Management Solutions Ltd April 2012

  11. Effects Of Current Flowing Through The Body Safety & Management Solutions Ltd April 2012

  12. Portable equipment • Conditions and practices likely to lead to accidents • Unsuitable equipment • Maintenance • Defective apparatus • Environment

  13. First Aid • Raise alarm • Switch of power (emergency off, push/pull using good insulator) • Call for professional help • Breathing – recovery position • Not breathing –mouth to mouth • Treat burns – sterile dressing • Treat for shock • Remain with person

  14. Reducing risk • Limited access to live parts – impossible to make direct contact without use of a tool or a key • Insulating or shielding live parts – contact cannot be made without removing the insulation • Limiting supply types and voltages to relatively safe values • Ensuring that staff who may gain access to live parts are competent – fully insulated tools and follow safe working practices

  15. Selection of equipment • Do not exceed strength of capacity of equipment • Use appropriate equipment – consider environment- hazardous, arduous, work to be completed • CE Marked • Use lower voltage supply if possible • Check insulations meet BS 7671-1992 • Alterations to systems to be done by competent person • Overload protection devices are not limited to portable equipment

  16. Protective equipment • Fuse • Circuit breakers • Insulation • Low voltages • RCD • Double insulation

  17. Portable equipment • Choose low voltage or cordless tools • Visually inspect before use • Regular maintenance • Test regularly for earth fault leakage • Fit overload protection devices to systems and RCD

  18. Contact with services • Overhead lines - Causes arcing • Consider scaffold poles, ladders, cranes, tipper lorries, spades • Buried services • Locate cables – plans, cable detectors • Mark ground to show location • Use hand digging tools near to services • Emergency procedures

  19. User checks • PAT labels • Bare wires • Cable covering undamaged • Cable length • Plug condition • Burn marks • Taped/non standard joints • Cable gripped correctly • Outer case damaged • Trip devises

  20. Formal visual inspections • Routinely carried out • Risk assessment • Manufacturers recommendations • HSG (107) • Competent person • Records – must be kept, definitive list, regulate use

  21. Safe working • Accessible means of isolation • Prevention of inadvertent re-connection • Switches – keep access clear, mark clearly

  22. Safe working - dead • Provide temporary earth • Prove isolated circuits are dead • Prove test instruments first

  23. Safe working - live • Only allow if no other way • Suitable precautions to prevent injury • Competent persons, provide information, suitable tools, 2 man working/

More Related