1 / 18

Yun Xu 1 , Eric Rignot 1,2 , Dimitris Menemenlis 2 , Michele Koppes 3

Modeling of Subaqueous Melting of Greenland Tidewater Glaciers Using an Ocean General Circulation Model. Yun Xu 1 , Eric Rignot 1,2 , Dimitris Menemenlis 2 , Michele Koppes 3 1 Earth System Science, University of California Irvine, Irvine, CA, United States

kacy
Download Presentation

Yun Xu 1 , Eric Rignot 1,2 , Dimitris Menemenlis 2 , Michele Koppes 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Modeling of Subaqueous Melting of Greenland Tidewater Glaciers Using an Ocean General Circulation Model Yun Xu1, Eric Rignot1,2, Dimitris Menemenlis2, Michele Koppes3 1 Earth System Science, University of California Irvine, Irvine, CA, United States 2 Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, United States 3 Geography, University of British Columbia, Vancouver, BC, Canada

  2. Subaqueous Melting Subaqueous melting is important for tidewater glaciers large subaqueous melt rate [m/day] a possible trigger of calving causes glacier un-grounding and retreat, trigger glacier acceleration • Melting occurs on the vertical calving faces of Greenland tidewater glaciers. • Melting will increase with ocean thermal forcing and with subglacial runoff • We need to better understand these processes Warm water Subglacial runoff (fresh, cold) (Motyka, 2003; Rignotet al., 2010)

  3. Modeling of subaqueous melting with MITgcm Because when we put a piece of ice in the water… ΓT,ΓT follow Jenkins et al. (2010) γT0, γS0 follow Losch (2008) Melt water subglacial runoff z x

  4. 2-D Sensitivity Experiments Results • Melt rate (q) vssubglacial flux (Qsg) q depends on Qsg:q is very small when there is no Qsg, and increases sub-linearly with Qsg. • q is insensitive to channel height • q drops when the subglacial plume move at high speed and detach from the ice wall • q ~ m/d • Melt rate (q) vs thermal forcing (TF) TF = ocean temperature – freezing point q increases linearly with TF 3-D simulation on Store Gletscher Fjord

  5. LandSat Images of Store Glacier These locations are correspoinding to the upwelling subglacial plumes 2008.07.08 http://glovis.usgs.gov/

  6. LandSat Images of Store Glacier 2011.07.01 http://glovis.usgs.gov/

  7. LandSat Images of Store Glacier 2011.08.02 http://glovis.usgs.gov/

  8. Photographs of Store Glacier

  9. Photographs of Store Glacier Best guess

  10. Model Configuration of Subglacial Discharge (Ettema et al., 2009) 200 m3/s 200 m3/s 200 m3/s 50 m 1000 m 200 m

  11. Calculation of Subglacial Flow Speed • Channels tend to enlarge by melting and shrink by ice deformation Balance of the two effects provides an estimate of the channel size (Röthlisberger, 1972 and Hooke et al., 1990) • Store glacier geometry:ice-water pressure difference is 1.4 bar,  Channel 1: Qsg= 200 m3/s, width = 50 m, height = 10.2 m, speed = 0.57 m/s; Channel 2: Qsg= 200 m3/s, width = 1000 m, height = 0.33 m, speed = 0.93 m/s; Channel 3 : Qsg= 200 m3/s, width = 200 m, height = 2.2 m, speed = 0.68 m/s; 76 m 500 m

  12. Plume Trajectory and Width • Based on 1-D plume model (Mugford and Dowdeswell 2009) if entrainment rate = 0.036 (Jenkins 2011) the plume quickly grows to > 10 m; if entrainment rate = 0.1 (Mugford & Dowdeswell 2009) the plume is bigger  We choose horizontal resolution = 10m in the 3-D simulation. Ice front

  13. Model Configuration for 3-D Simulation Store Gletscher free surface, non-hydrostatic Ly=5 km Lx=5 km H=500 m Qsg:T= -0.28 ̊C S=0 Resolution Δx = 10m ~ 50mΔy = 10m Δz = 5m CTD collected in August 2010 in Store glacial fjord, West Greenland used as ocean boundary condition

  14. Results – Melt Rate Melt Rate on the Ice Face (m/d) An order of magnitude smaller Fast melting along upwelling plumes Slow melting elsewhere Average melt rate ~ 1.2 m/d

  15. Results – Melt Rate Shows some consistence of the model simulation 2-D 3-D

  16. Surface Velocity - view from above • Upwelling plumes push water moving away from the ice at the sea surface • Water return to the ice between upwelling plumes • Complex surface feature even without winds or tides Consistent with what we see in some videos in front of glaciers coriolis Ice front

  17. Conclusions • The MITgcm shows that subaqueous melting depends on the subglacial runoff and the ocean thermal forcing. • 3-D simulation produces sensibly the same melt rate as that in 2-D. • Model application to Store Gletscherfjord shows that the melt rate is 4 ~ 10 m/d along the upwelling subglacial plume, 0.3 m/d away from the subglacial plume; the average melt rate is about 1.2 m/d. • Spatial distribution of subglacial runoff is unknown, and it would yield complex circulation features in front of calving face. • Several aspects require more work, e.g. • underwater observations of the subglacial runoff and plume behavior. • additional complexities of fjord circulation, e.g., tides and wind forcing.

  18. Thank you! NASA Cryosphere Science Program Michiel van den Broeke for RACMO runoff data

More Related