1 / 29

Warm-Up

Warm-Up. Identify two different ways to change the form of a material. Warm-Up. Which type of manufacturing decreases errors and increases quality?. Manufacturing Processes. The form of materials is changed by: Separating Forming Combining Conditioning. Manufacturing is….

katy
Download Presentation

Warm-Up

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Warm-Up • Identify two different ways to change the form of a material.

  2. Warm-Up • Which type of manufacturing decreases errors and increases quality?

  3. Manufacturing Processes • The form of materials is changed by: • Separating • Forming • Combining • Conditioning

  4. Manufacturing is… • The construction of many of the same item at one time, usually using assembly lines and interchangeable parts.

  5. Objective • Identify examples of manufacturing processes • Understand push and pull manufacturing

  6. Cheaper goods Better quality goods Jobs, jobs, jobs, Higher standard of living Food Fuel Shoes and Clothes Cars Modular Homes Integrated Circuit Chip Pencils and Pens How does manufacturing affect our lives?

  7. Manufacturing Processes • The form of materials is changed by: • Separating • Forming • Combining • Conditioning

  8. Durable Goods • Do not quickly wear out. • May be used over and over • Cars • Bricks • Electronics • Non-durables include: • Food • Clothing • Paper products

  9. Steps in Manufacturing • Turning raw materials into finished goods on a large scale. • Obtaining and preparing raw materials • Processing the materials mechanically or chemically • Assembling • Testing • Inspecting • Packaging

  10. Gathering Raw Materials • This is done using three major methods. • Mining • Drilling • Harvesting

  11. Mining • Mining involves digging resources out of the earth. • Open-pit mining: a type of mining used when the resource is close to the surface. • Underground mining: a mining method that uses digging tunnels to reach the material.

  12. Drilling • A method used to reach underground liquid resources such as oil and water. • A small round hole is drilled using a derrick and a drill bit that grinds up the rock as it drills.

  13. Harvesting • Harvesting is a method used to collect a growing resource. Trees are the major “growing” resource that produce engineering materials. • Also harvested: • Cotton • Sugarcane and corn for ethanol • production

  14. Push Production • As each person finishes his/her job, it is pushed to the next person. • Faster production. • Increased chance of error - less quality.

  15. Pull Production • Each person does not start a new part until their last one has been pulled from them. • Increased quality. • Fewer errors • Slower production.

  16. Traditional Manufacturing • Mass Production – • Uses interchangeable standardized parts that can quickly be assembled • Breaks complex operations down into simple steps that can be performed by unskilled workers • Output from the first process in the sequence drives • the second process and so on

  17. New Trends in Manufacturing • Lean Production – • Less of everything is required to produce the same quantity that traditional mass production generated • Less materials, equipment, manhours, time, effort, capital • A ‘PULL’ Manufacturing system that is driven by customers orders and need for specific parts

  18. New Trends in Manufacturing • KANBAN • Cards that carry information from one process to processes that come afterward • Tell about what and how much to produce next. • Identifies the type of part, how many there are, and other basic information. • “Pulls” only needed parts without maintaining extra inventory

  19. New Trends in Manufacturing • Quality Circles • Employees, working in teams, set aside time to review work procedures • Come up with ways of enhancing their performance.

  20. New Trends in Manufacturing • KAIZEN • Continuous improvement • an on-going process involving a variety of activities to reduce waste and inefficiency

  21. New Trends in Manufacturing • ANDON • A system to notify management, maintenance, and other workers of a quality or process problem • Uses a signboard incorporating signal lights to indicate which workstation has the problem

  22. Push Production • As each person finishes his/her job, it is pushed to the next person. • Faster production. • Increased chance of error - less quality.

  23. Pull Production • Each person does not start a new part until their last one has been pulled from them. • Increased quality. • Slower production.

  24. Push versus Pull Manufacturing • PUSH – complete task as quickly as possible • Faster Production (more items made in shorter period of time) • Less quality (more likely to make mistakes) • PULL – complete task only when the previously completed item is removed or ‘pulled’ • Slower production (more likely to have idle time) • Increased quality What is QC rate when 50 shirts are made and only 40 pass inspection?

  25. Quality Control Rate of Pd 8 and 9

  26. 5/4 Drill Use the data sheet provided to answer the following: - How did the amount of waste generated compare between Push and Pull production? - Use data to support your answer.

  27. Number of Objects Passing Inspection X 100 • QC= • QC= 125/200 X 100 = 12500/200 = 125/2 = 62.5% Total Number of Objects Made

  28. Copy this list of manufacturing processes and give examples of each from our Thanksgiving Card Project.

More Related