1 / 20

Chapter 9 - Simple Machines

Chapter 9 - Simple Machines. 9.2 Mechanical Advantage pp. 210-216. 9.2 Mechanical advantage. Mechanical advantage is the ratio of output force to input force. 9.2 Mechanical advantage. Machines multiply forces.

kaydence-rojas
Download Presentation

Chapter 9 - Simple Machines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 9 - Simple Machines 9.2 Mechanical Advantage pp. 210-216

  2. 9.2 Mechanical advantage • Mechanical advantageis the ratio of output force to input force.

  3. 9.2 Mechanical advantage • Machines multiply forces. • One person could lift an elephant—quite a heavy load—with a properly designed system of ropes and pulleys!

  4. 9.1 Mechanical Advantage Output force (N) MA = Fo Fi mechanical advantage Input force (N)

  5. 9.2 The Lever • A lever includes a stiff structure (the lever) that rotates around a fixed point called the fulcrum.

  6. 9.2 The Lever • Levers are useful because you can arrange the fulcrum and the input arm and output arm to adjust the mechanical advantage of the lever.

  7. 9.2 The Lever • Each class of levers is defined by the location of the input and output forces relative to the fulcrum.

  8. 9.2 Gears • Many machines require that rotating motion be transmitted from one place to another. • Gears change force and speed.

  9. 9.2 Designing Gear Machines • The gear ratio is the ratio of output turns to input turns. • You can predict how force and speed are affected when gears turn by knowing the number of teeth for each gear.

  10. 9.2 Gear Ratios Number of teeth on input gear To=Ni Ti No Turns of output gear Turns of input gear Number of teeth on output gear

  11. 9.2 Tension • Ropes and strings carry tensionforces along their length. • If the rope is not moving, its tension is equal to the force pulling on each end.

  12. 9.2 Ramps • A ramp is a simple machine that allows you to raise a heavy object with less force than you would need to lift it straight up. • The mechanical advantage of a ramp is the ramp length divided by the height of the ramp.

  13. 9.2 Screws • A screwis a rotating ramp. • You find the mechanical advantage of a screw by dividing its circumference by the lead.

  14. 9.2 Screws • A wedgeis like a ramp that can work while in motion (a ramp is always stationary). • A wedge has a side that slopes down to a thin edge. • The mechanical advantage for a wedge is inversely related to the size of the wedge angle.

  15. 9.2 Wheel and axle • A wheel rotates around a rod called an axle. • The mechanical advantage is the ratio of the radius of the wheel to the radius of the axle. • The wheel and axle move together to move or lift loads.

  16. Solving Problems • A crowbar is a type of lever that you use to pull a nail out of a piece of wood. • If the handle of a crowbar is 40 centimeters and the foot is 2 centimeters, what is its mechanical advantage?

  17. Solving Problems • Looking for: • …mechanical advantage of lever • Given • …input arm = 40 cm; output arm = 2 cm • Relationships: • M.A. = Length of input arm Length of output arm • Solution • M.A. = 40 cm ÷ 2 cm = 20

  18. MECHANICAL ADVANTAGE • Complete “Your Turn” problems on p. 215 • Complete Skill Sheet

More Related