1 / 27

Instrument Approach Charts

Instrument Approach Charts. Which fixes on the IAP Charts are initial approach fixes? A. Any fix on the en route facilities ring, the feeder facilities ring, and those at the start of arc approaches.

keenan
Download Presentation

Instrument Approach Charts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Instrument Approach Charts

  2. Which fixes on the IAP Charts are initial approach fixes? A. Any fix on the en route facilities ring, the feeder facilities ring, and those at the start of arc approaches. B. Only the fixes at the start of arc approaches and those on either the feeder facilities ring or en route facilities ring that have a transition course shown to the approach procedure. C. Any fix that is identified by the letters IAF.

  3. Which fixes on the IAP Charts are initial approach fixes? C. Any fix that is identified by the letters IAF.

  4. 5.4.7.1.7.A.1 J33 Aircraft approach categories are based on A. 1.3 times the stall speed in landing configuration at maximum gross landing weight. B. 1.3 times the stall speed at maximum gross weight. C. certificated approach speed at maximum gross weight.

  5. 5.4.7.1.7.A.1 J33 Aircraft approach categories are based on A. 1.3 times the stall speed in landing configuration at maximum gross landing weight.

  6. 4.4.4.7.0.A.1 J16 What does the symbol T within a black triangle in the minimums section of the IAP for a particular airport indicate? A. Instrument takeoffs are not authorized. B. Takeoff minimums are not standard and/or departure procedures are published. C. Takeoff minimums are 1 mile for aircraft having two engines or less and 1/2 mile for those with more than two engines.

  7. 4.4.4.7.0.A.1 J16 What does the symbol T within a black triangle in the minimums section of the IAP for a particular airport indicate? B. Takeoff minimums are not standard and/or departure procedures are published.

  8. 5.4.6.3.6.A.1 I10 What does the absence of the procedure turn barb on the planview on an approach chart indicate? A. A procedure turn is not authorized. B. Teardrop-type procedure turn is authorized. C. Racetrack-type procedure turn is authorized.

  9. 5.4.6.3.6.A.1 I10 What does the absence of the procedure turn barb on the planview on an approach chart indicate? A. A procedure turn is not authorized.

  10. 5.4.6.7.1.A.1 J18 During an instrument approach, under what conditions, if any, is the holding pattern course reversal not required? A. When cleared for the approach. B. None, since it is always mandatory. C. When radar vectors are provided.

  11. 5.4.6.7.1.A.1 J18 During an instrument approach, under what conditions, if any, is the holding pattern course reversal not required? C. When radar vectors are provided.

  12. 5.4.6.3.7.A.1 I10 When making an instrument approach at the selected alternate airport, what landing minimums apply? A. Standard alternate minimums (600-2 or 800 2). B. The IFR alternate minimums listed for that airport. C. The landing minimums published for the type of procedure selected.

  13. 5.4.6.3.7.A.1 I10 When making an instrument approach at the selected alternate airport, what landing minimums apply? C. The landing minimums published for the type of procedure selected.

  14. 5.4.6.3.2.A.1 J18 When the approach procedure involves a procedure turn, the maximum speed should not be greater than A. 200 knots IAS. B. 180 knots IAS. C. 250 knots IAS.

  15. 5.4.6.3.2.A.1 J18 When the approach procedure involves a procedure turn, the maximum speed should not be greater than C. 250 knots IAS.

  16. What obstacle clearance and navigation signal coverage is a pilot assured with the Minimum Sector Altitudes depicted on the IAP charts? A. 500 feet and acceptable navigation signal coverage within a 10 NM radius of the navigation facility. B. 1,000 feet and acceptable navigation signal coverage within a 25 NM radius of the navigation facility. C. 1,000 feet within a 25 NM radius of the navigation facility, but not acceptable navigation signal coverage.

  17. What obstacle clearance and navigation signal coverage is a pilot assured with the Minimum Sector Altitudes depicted on the IAP charts? C. 1,000 feet within a 25 NM radius of the navigation facility, but not acceptable navigation signal coverage.

  18. 5.4.6.7.2.A.1 J18 During an instrument precision approach, terrain and obstacle clearance depends on adherence to A. terrain contour information. B. minimum altitude shown on the IAP. C. natural and man made reference point information.

  19. 5.4.6.7.2.A.1 J18 During an instrument precision approach, terrain and obstacle clearance depends on adherence to B. minimum altitude shown on the IAP.

  20. 5.4.7.3.4.A.1 J19 When being radar vectored for an ILS approach, at what point may you start a descent from your last assigned altitude to a lower minimum altitude if cleared for the approach? A. You may descend immediately to published glide slope interception altitude. B. When established on a segment of a published route or IAP. C. Only after you are established on the final approach unless informed otherwise by ATC.

  21. 5.4.7.3.4.A.1 J19 When being radar vectored for an ILS approach, at what point may you start a descent from your last assigned altitude to a lower minimum altitude if cleared for the approach? B. When established on a segment of a published route or IAP.

  22. 5.4.6.7.0.A.1 J18 When simultaneous approaches are in progress, how does each pilot receive radar advisories? A. On approach control frequency. B. One pilot on tower frequency and the other on approach control frequency. C. On tower frequency.

  23. 5.4.6.7.0.A.1 J18 When simultaneous approaches are in progress, how does each pilot receive radar advisories? C. On tower frequency.

  24. 5.4.7.4.9.A.1 J18 When may a pilot make a straight in landing, if using an IAP having only circling minimums? A. The pilot may land straight in if the runway is the active runway and he has been cleared to land. B. A straight in landing may not be made, but the pilot may continue to the runway at MDA and then circle to land on the runway. C. A straight in landing may be made if the pilot has the runway in sight in sufficient time to make a normal approach for landing, and has been cleared to land.

  25. 5.4.7.4.9.A.1 J18 When may a pilot make a straight in landing, if using an IAP having only circling minimums? C. A straight in landing may be made if the pilot has the runway in sight in sufficient time to make a normal approach for landing, and has been cleared to land.

  26. 5.4.7.1.4.A.1 J33 Which procedure should be followed by a pilot who is circling to land in a Category B airplane, but is maintaining a speed 5 knots faster than the maximum specified for that category? A. Use the approach minimums appropriate for Category C. B. Use Category D minimums since they apply to all circling approaches. C. Use Category B minimums.

  27. 5.4.7.1.4.A.1 J33 Which procedure should be followed by a pilot who is circling to land in a Category B airplane, but is maintaining a speed 5 knots faster than the maximum specified for that category? A. Use the approach minimums appropriate for Category C.

More Related