1 / 8

Clic Vertex Thermal Setup

Clic Vertex Thermal Setup. 26/08/2013 Maxence CURDY. CERN PH/DT/EO. Overview. Thermo-mechanical setup progress. Stave prototype: assessment of different solutions tested, proposal for next steps. Production status. Infrastructure: - Bosh profiles: Ok.

kinsey
Download Presentation

Clic Vertex Thermal Setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Clic Vertex Thermal Setup 26/08/2013 Maxence CURDY CERN PH/DT/EO

  2. Overview • Thermo-mechanical setup progress. • Stave prototype: assessment of different solutions tested, proposal for next steps.

  3. Production status Infrastructure: - Bosh profiles: Ok. - Polycarbonate walls: Machining. - Joints: Ok. - Junction rectangle/cylinder: Ok. - Small mechanical parts: Machining. - Fan: Ok. - Flow Meter: Ordered. - Data Acquisition (DAQ): Ok. Everything has been stored in the building 187

  4. Bosh profiles

  5. The Turntable

  6. Fan + cone It's just assembled for the picture, not mounted.

  7. What remains to be done ?- Machining last parts. - Machining /assembly the box. - Water jet cutter  wait the plate for welding the cone.- Supply the fan.- Assembling all setup. - Heaters Contact with MINCO or Wolfgang. - Ordered Pt1000 sensor Farnell or Radiospares.- Stave fixation. Production status

  8. Stave 3 4 5 6 7 8 Weight for 280mm  6.7g 3.5g 2.38g 3.08g 2.77g 1.51g

More Related