1 / 9

Proposed Revisions to NSF 61 Section 5

Proposed Revisions to NSF 61 Section 5. December 3, 2009. NSF 61 Section 5. Covers tank and pipe coatings for: Field Applied Factory Applied. Coating Requirements. Pipe and Fittings Sec 4 (17 day exposure) Field applied Immediate return to service pipe coatings Sec 5 (1 day)

kirby-cotton
Download Presentation

Proposed Revisions to NSF 61 Section 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Proposed Revisions to NSF 61 Section 5 December 3, 2009

  2. NSF 61 Section 5 Covers tank and pipe coatings for: Field Applied Factory Applied

  3. Coating Requirements • Pipe and Fittings Sec 4 (17 day exposure) • Field applied Immediate return to service pipe coatings Sec 5 (1 day) • Other pipe and tank coatings Sec 5 (5 day) • Pipes with factory applied coatings are tested to 17 day exposure. • Coatings that are intended for application to pipe in the factory are tested to 5 day protocol. • Factory applied pipe only coatings should be tested to 17 day protocol.

  4. NSF 61 Section 5 • Additional minor editorial revisions are also suggested. • Replace “or” with “and” in definition of immediate return to service coatings.

  5. NSF 61 Section 5 • Allow use of the disinfection methods cited in AWWA C651 for disinfection of pipe coatings in Section 5.5.4.

  6. NSF 61 Section 5 • Section 5.5.5.4 should be revised to reference the conditioning and exposure protocols for pipe only coatings.

  7. NSF 61 Section 5 • Section 5.8.1 contains outdated references to the MALs. This should be revised to reference TACs and SPACs for flowing/static conditions.

  8. NSF 61 Section 5 • Table 5.7 has been proposed for listing surface area to volume ratios for pipe based on nominal diameter for convenience in applying normalization criteria.

More Related